SwedeSpeed - Volvo Performance Forum banner
Status
Not open for further replies.
1,161 - 1,180 of 2,061 Posts
volvodiag.com is not happy with too many different IP addresses on Bahnhof, so it is now blocking the whole network by its ASN number 8473.
Or volvodiag.com is using a blocklist where Bahnhof has earned its place by other previous abuse or spam.
But I dont send any spam, perhaps you can open it just a coupler of dags?
 
Discussion starter · #1,163 ·
Your IP is registered to AS8473. AS8473 is registered to bahnhof.net which is a cloud/vps. IP addresses registered to bahnhof.se are not blocked.

113977
 
Save
I get this message
What happened?

The owner of this website (volvodiag.com) has banned the autonomous system number (ASN) your IP address is in (8473) from accessing this website.

Cloudflare Ray ID: 6006ca78fc351699
 
Hello Roxana,

VIDA is working correctly inside your virtual machine; I can login and view schematics just fine. Thanks for providing this the virtual machine options, works great!

I do seem to have some trouble getting my DICE to work. It is a far-east dice (aliexpress . com/item/1943112318.html).
When I plugged the DICE into the car, ignition in position two, the firmware LEDs are blinking as was the bluetooth LED. The vehcile interface LED was not blinking though. Will this only blink if the correct USB drivers are installed?

I extracted the drivers from the guest machine and installed them on the host. The USB led blinked briefly when I did this, then went out completely as did the bluetooth LED.

In device manager in the guest and the host, DICE is not showing. VIDA also does not recognize this. What do I do now?

Thanks, best, Tim
 
I'm stuck getting my dice to connect.

I have VMware running for my job, so I added Service Machine R2, which installed and runs.

I get the first flashing green light on my Dice, but no USB light. The VIDA icon on my tray is green.

I can run Hilton Tuning Suite and see my model year and VIN, so I think my Dice works.

When I click on Vida All-In-One I get HTTP status 404.

I am running Windows 7 Professional and IE V11.

I also tried running on Chrome with no luck, it says 'This page can't be displayed'.

I preconfigured my USB to 3.0.

Not sure what's wrong now...I'm so close. How do I get the USB light to turn on so I can connect?
 
Save
I'm stuck getting my dice to connect.

I added Service Machine R2, which installed and runs.

When I click on Vida All-In-One I get HTTP status 404.

I am running Windows 7 Professional and IE V11
The first two lines sound like a contradiction.
I had VIDA running on a Win-7 laptop just fine, and then Windows updated IE to 11. It quit working. I reverted to !E-9 as is required, and it resumed working. Others have reported success with IE-11.
 
Save
I've converted the image from roxanaschram to a Virtualbox file (ova file, so it can imported).

It can be downloaded here, password is "Swedespeed":
https://albino71.stackstorage.com/s/OK2TJFu6dZUCAh5

All credits to roxana off course!

Short Instructions:
Download VirtualBox, install and then run it.
Create a Virtual Machine (Windows 10 32bit), use the downloaded file as your virtual harddisk.
Give the VM enough memory and video memory.
Connect your dice to your PC/laptop and add it to the VM's USB devices
Run the VM, use the credentials as mentioned in de opening post from this thread, enjoy! ;)

Cheers!
Hi! The link not working more. Can you please send it to me or upload somewhere?
Thank you for your cooperation.
 
Hi, Roxana

Are you still OK for providing support via computer link to set up VIDA on personal computer?

I tried to update to Win10 (VirtualBox) on MBP but having issues.
 
Save
Hi, I'm also having some trouble accessing your site as my IP is also blocked. I do not understand why. I was able to access your site months ago and now I can't. I now need to make a hotpsot with my phone and use data. Not to mention it's really slow.

Perhaps your cloudflare security settings is a little too strict? I have attached screenshots for more information. I blurred out my IP but if its possible to remove my IP how can I do this?

Image
Image
 
Save
Discussion starter · #1,171 ·
Hi! The link not working more. Can you please send it to me or upload somewhere?
Thank you for your cooperation.
It's irrelevent and outdated. Go to volvodiag.com to download the latest. Note that VPN AND VPS servers are blocked as well as certain networks with HEAVY malicious activities.

Hi, Roxana

Are you still OK for providing support via computer link to set up VIDA on personal computer?

I tried to update to Win10 (VirtualBox) on MBP but having issues.
I've been working extra hours at a part time job to cover the costs of the site and so I don't have any time I'm willing to give away to support at the moment.

Hi, I'm also having some trouble accessing your site as my IP is also blocked. I do not understand why. I was able to access your site months ago and now I can't. I now need to make a hotpsot with my phone and use data. Not to mention it's really slow.

Perhaps your cloudflare security settings is a little too strict? I have attached screenshots for more information. I blurred out my IP but if its possible to remove my IP how can I do this?
The ASN your IP address is registered to is blocked to to heavy malicious activity including a DDoS attack a few months ago, after looking at the company site listed to the ASN, it appears to be a business/commercial/cloud relation not home internet provider so I've NOT unblocked it. Data-centres, cloud, VPS and VPN providers, as well as networks with HEAVY malicious activities are blocked. I go through the logs and firewall activity weekly and any home internet service providers ASN blocked I WILL UNBLOCK but not commercial/business ASN.

---------------

Just to give an idea of why I block these networks besides the security concerns, since blocking the networks malicious people (script kiddies) use to attack servers, volvodiag.com has dropped from 16TB bandwidth a month to 13TB. That's 3TB a month of malicious activities a month.
 
Save
Discussion starter · #1,172 · (Edited)
FYI. I'm working on a portal that you can visit to submit your home IP address for bypass from the firewall filtering. You're IP will be investigated to insure it's not a VPN or VPS and if passed, unblock your IP. In the mean time, email unblock@volvodiag.com with your IP. I'll check in to it.
 
Save
FYI. I'm working on a portal that you can visit to submit your home IP address for bypass from the firewall filtering. You're IP will be investigated to insure it's not a VPN or VPS and if passed, unblock your IP. In the mean time, email unblock@volvodiag.com with your IP. I'll check in to it.
Optinet is not my ISP. Mweb is.

I will send you a email explaining everything with my IP address for better understanding.
 
Save
It's irrelevent and outdated. Go to volvodiag.com to download the latest. Note that VPN AND VPS servers are blocked as well as certain networks with HEAVY malicious activities.

I've been working extra hours at a part time job to cover the costs of the site and so I don't have any time I'm willing to give away to support at the moment.

The ASN your IP address is registered to is blocked to to heavy malicious activity including a DDoS attack a few months ago, after looking at the company site listed to the ASN, it appears to be a business/commercial/cloud relation not home internet provider so I've NOT unblocked it. Data-centres, cloud, VPS and VPN providers, as well as networks with HEAVY malicious activities are blocked. I go through the logs and firewall activity weekly and any home internet service providers ASN blocked I WILL UNBLOCK but not commercial/business ASN.

---------------

Just to give an idea of why I block these networks besides the security concerns, since blocking the networks malicious people (script kiddies) use to attack servers, volvodiag.com has dropped from 16TB bandwidth a month to 13TB. That's 3TB a month of malicious activities a month.
Roxana

First off Merry Christmas! I hope you and yours are not seriously impacted by CV19!

Regarding on line support I do not expect you to provide personal online support for free!

You assisted me a couple years back and that was much appreciated.

At that time it was $30.00.

The work and time you provide this forum is huge. Thanks.

Let me know what the fee will be and when you have time.

Thanks

David
 
  • Like
Reactions: Capndirk
Save
Discussion starter · #1,175 ·
Roxana

First off Merry Christmas! I hope you and yours are not seriously impacted by CV19!

Regarding on line support I do not expect you to provide personal online support for free!

You assisted me a couple years back and that was much appreciated.

At that time it was $30.00.

The work and time you provide this forum is huge. Thanks.

Let me know what the fee will be and when you have time.

Thanks

David
If you need help, email me at volvodiagsite@gmail.com. I check it ever day or so normally. Since setting up the site it's been a bit of a financial burden so I've been working a part time job... I only use funds from my part time job of like 3-4 hours a week and with Covid I could use more funds for the site. It's so sad that only 26 people (seriously, I counted) have donated but 2670+ people have download. I'm thinking doing "support" may be a way to help it out.
 
Save
If you need help, email me at volvodiagsite@gmail.com. I check it ever day or so normally. Since setting up the site it's been a bit of a financial burden so I've been working a part time job... I only use funds from my part time job of like 3-4 hours a week and with Covid I could use more funds for the site. It's so sad that only 26 people (seriously, I counted) have donated but 2670+ people have download. I'm thinking doing "support" may be a way to help it out.
Makes me question where the world is going! You provide a service that is obviously appreciated (just look at all the sites that copy your words verbatim!) and yet no one is willing to pay for it!

Just one SUM calibration will save you north of $100.00. Yet you can not send anything for the software!

A real shame!
 
Save
Donated, thanks @roxanaschram

Sorry, it went as goods and services after I messed up adjusting for currency exchange/ fees. I can redo as friends and family if you want to refund...
 
Save
Discussion starter · #1,178 ·
I appreciate the donation. I'm fine the way you sent it. I'm just glad someone else is contributing to the funds used to power the site. Just to give an idea of why I work a small part time job to cover the site, the internet connection alone is 100$ a month, plus the cost of the hardware I purchase to run it and keep it secure. I had the internet on a 250$ a month plan but couldn't afford that. I don't expect people to throw some large amount at the site funds, but if 25% of the people that download had donated 5$, that could pay for the internet for 2 years. I don't know or get how swedespeed can afford to run, it has to be costing them a fortune. I doubt the ad revenue is that profitable. I won't put ads on the site even if it was. So many people run ad blockers these days it won't do any good.
 
  • Like
Reactions: CDN XC90
Save
I appreciate the donation. I'm fine the way you sent it. I'm just glad someone else is contributing to the funds used to power the site. Just to give an idea of why I work a small part time job to cover the site, the internet connection alone is 100$ a month, plus the cost of the hardware I purchase to run it and keep it secure. I had the internet on a 250$ a month plan but couldn't afford that. I don't expect people to throw some large amount at the site funds, but if 25% of the people that download had donated 5$, that could pay for the internet for 2 years. I don't know or get how swedespeed can afford to run, it has to be costing them a fortune. I doubt the ad revenue is that profitable. I won't put ads on the site even if it was. So many people run ad blockers these days it won't do any good.
Roxana

Everyone who has used your software OR asked for support should think about what it would be like if your site and support had not been there!!

To think that only 1% of those who downloaded your work were good enough to DONATE! The rest should be embarrassed!
 
  • Like
Reactions: ttknf
Save
1,161 - 1,180 of 2,061 Posts
Status
Not open for further replies.
You have insufficient privileges to reply here.