SwedeSpeed - Volvo Performance Forum banner

P3tool - Config tool for P3 platform

2 reading
56K views 25 replies 18 participants last post by  rrozanoff  
#1 · (Edited)
Hi guys,

I found this tool called p3tool, a configuration tool for the P3 platform.


Does anyone of you know if this tool is available for public download?

Have you tried it out?

Gesendet von meinem SM-G973F mit Tapatalk
 
#2 ·
Hi guys,

I found this tool called p3tool, a confirmation tool for the P3 platform.


Does anyone of you know if this tool is available for public download?

Have you tried it out?

Gesendet von meinem SM-G973F mit Tapatalk
You can ask the author directly, as he is also here.

Sent from my SM-N975F using Tapatalk
 
#3 ·
Hey, thanks :) I just saw the other thread:


I will continue writing inside that thread. Please ignore this duplicate thread.

Gesendet von meinem SM-G973F mit Tapatalk
 
#5 ·
Nice question. I would like to see a top to buttom retrofit using the P3tool aswell, maybe even with a YouTube video?

I have several things on my to-do list I am planning to to, but I am afraid this will be delayed until autumn or winter as I just do not have the time to take care of it right now :-/

Gesendet von meinem 2109119DG mit Tapatalk
 
#18 ·
Good afternoon! I have an XC70 D5244T10 with Webasto TT Vevo (upgraded the heater from V to Vevo, the software is official). The release date of the car is June 2010, the model year is 2011. I would like to sort out a couple of parameters related to Webasto: 1. #022 Additional heater/heater powered by fuel. An option is defined in the configuration 0х03 Fuel Fired parking heater, But at the same time, two timers can be set on the dashboard, why is the 0x03 option set in this case, shouldn't there be a 0x04 option - Fuel Fired parking heater with timer and add heater? Or do I misunderstand the value of the 0x04 option? 2. I plan to install ThermoCall TC4 Entry, there are configurations #056 Callstart of parking heater. Now, of course, there is a point 0х01 - Without callstart of parking heater Which of the options corresponds to the launch via ThermoCall: 0x02 - callstart of parking heater, accessory only (via pager) 0x03 - …. (via radio) On the one hand, Telestaet T91 and ThermoCall TC4 differ only in the way they receive the signal, as Webasto assures, and on the other hand, the pager is the same text control via GSM. Can you tell the difference?
 
#19 ·
Добрый день. Нашел инфу по программированию авто через p3tool.где скачать программу и снять защиту оборудования. Как я понял подбор ПИН кода к СЕМ это и есть снятие защиты. Помогите пожалуйста.volvo xc70 2008 P3
 
#21 ·
This is a good find. Recently I changed the tires on my 2016 V60. Manual says I can use 235/40/18 or 235/45/18. The 40 sidewall was on and I chose 45 for the new tires. Speedo is off by 2 MPH at 60 MPH. Dealer says this can't be corrected unless I have changed wheels. Doesn't make sense to me. Is manual wrong? TO me it seems that the tech would plug in wheel size and tire size and update speedo. But they say no. Would this program allow the tire size update?
 
#23 ·
I changed my Standard Rear view Mirror with an auto dimming one.
I've started decoding my PIN, but I've already noticed the Car Config for the rear mirror is set as "Auto Dimming" when I do the read only with my Dice.

So even if I decode the pin and pay for the tool, the car config is what it should be for this new mirror?? So I can't get it working.

It has a LIN wire, and vida is reporting an unknown LIN device which I assume is the mirror.

Upon reading, the retrofit of this suggests a software pack is needed??

Can the p3tool sort this, or vdash?
 
#24 ·
Hey guys,

this is some sort of an accidentally written duplicate thread. I suggest to go here for the main thread :)