PB Blast is awesome - great lubricant. Also White Lightning is very good too.

 

Re: (Bender)

Bender:

Thanks for the recommendation. There is an O'Reilly Auto Parts on the corner from my place. I will check if they have it.

Thanks
Neil

 

Silicone lubricant spray works well.

 

Maybe I'm old school,but I still use WD 40 on just about everything from cars,to motorcycles to guns.

 

Re: (Jeff in Ferndale Wa)

Quote, originally posted by Jeff in Ferndale Wa »

... guns.

I hope you are not bringing those to track days!

 

Re: Creaking driver's door - Use WD40? (NeilAgg)

White lithium grease is the correct grease to use for metal to metal contact in this situation. I reccomend 3M in a spray can. Applying WD40 will wash out any original grease, it will also not last as long and you will have to apply much more often.

 

Re: (NeilAgg)

Quote, originally posted by NeilAgg »

I hope you are not bringing those to track days!

You will never know unless it's needed

 

Re: (Jeff in Ferndale Wa)

Quote, originally posted by Jeff in Ferndale Wa »

You will never know unless it's needed

In that case, I am not going anywhere near the track when you are on it!

 

Re: Creaking driver's door - Use WD40? (ELM)

Quote, originally posted by ELM »

White lithium grease is the correct grease

I bought some and sprayed the door hinges liberally.

Problem solved!

Thank you. http://********************/smile/emthup.gif

 

Re: Creaking driver's door - Use WD40? (NeilAgg)

Any white Lithium spray or tube grease made for door hinges.
Apply liberally, (spray inside the doors, etc) wipe off the excess.
You may have to to this a couple of times.