SwedeSpeed - Volvo Performance Forum banner

Cargo light not working and Sunroof broken

1 reading
2.8K views 4 replies 3 participants last post by  hangya  
#1 ·
Hi everyone

So as Im working toward to stage 0 this beloved V70, I obviously hitting some roadblocks.

My cargo light never been worked, ( I got the car like this) and i just can get figured what is the issue
what I been checked:
  • bulb been changed for a known working one
  • fuses are good, double checked
  • wiring don't have any physical damage or fray
  • done numerous reset, full battary and UEM too
I have to mention, I had the issue with the siren module, which has been changed and is now working, but the aim with this to make the sunroof working, which its still broken, got an error UEM-0053 sunroof module low voltage, Can be related?

Vidas got me an error as UEM-003D Luggage compartment lightning faulty signal. Google didn't give me any useful results...
Is there an y specific space where I should check cabling?


All my other lights are works perfectly, Dome light, Second row light, and even the courtesy lights
Do I miss something? Is the cargo light directly connected to UEM or it's connected to REM as well? is it related to the cargo door latch(it's closing opening even with a remote)?

Thanks!
 
#5 ·
Thanks for the reply, yes I been trough this already without succes, but I made it work.
As the siren crap out like 200k ago, the previous owner was disconnected the sunroof module, as the sunroof only opened but not closed,
After removing the module inspect it, then reconnect it I experienced the same behaviour, but this time I have a working siren module.
On an another forum a guy was detailing the problem and turned out the sunroof module really need to sit in a certain position(the T notch is between the 2 cables)

After this all function are working almost perfectly

Almost….

As now auto open works but only open 80% I could manually open fully, autoclose works too, tilt as well but not opening in tilt as much as it should, only halfway maybe 65%

Tried the calibration as Vida and here on the forum states but nothing happens… holding in tilt position it move a bit then release and hold again, one faint click and that’s it….

any idea?