[Turnpike7a]

these are what parts geek shows me
https://www.partsgeek.com/assets/products/thumb/8WJTQF2B.jpg

https://www.partsgeek.com/assets/aimage/thumb/DQXH8M94.jpg

both are listed as brake vacuum pumps,

@hoonk are you referring to the brake booster vacuum switch? i will try and test that this evening,

 

[Turnpike7a]

No vacuum in the brake booster would result in a hard to depress pedal, not squishy. Squishy pedal is often an air bubble trapped inside the brake system, or brake pads semi-frozen, or caliper's anti-rattle clip/spring installed incorrectly.

The air can be trapped inside ABS. In that case it can't be bled out without triggering the inlet/exhaust valves in ABS. You need a DiCE/VIDA or other capable scanner to do so.

That is what I thought as well, but being that I listened to the mechanic I ordered both the switch and the vacuum unit to replace, figured if I replace everything now, it will be good in the long run, don't have vida yet, that's the next thing to buy after I install all the new suspension parts I just got

Sent from my SM-G900V using Tapatalk