SwedeSpeed - Volvo Performance Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
275 Posts
Re: What is the inlet size on the rusty EVOLVE tips? Want to replace them... (Percy311)

What??? U dont want to pay $100 each to replace them?!? haha <IMG NAME="icon" SRC="http://www.vortexmediagroup.com/images/banghead.gif" BORDER="0">
 

·
Registered
Joined
·
1,310 Posts
I had rusty evolve tips after this winter... I used a scraper-sponge (the kind for dishes) on the tips and it got all the rust off, but slightly scraped the finish of the tips. I'm confident that metal polish will get them looking great again, and it's a lot cheaper than tips + welding.
 

·
Registered
Joined
·
380 Posts
Discussion Starter · #4 ·
mine really arent that bad, I just want an excuse to get some new ones...<br>somebody posted some black chrome tips and those would loog great with my color scheme,<br>just need to know the right dimensions
 

·
Registered
Joined
·
1,310 Posts
I'm assuming you don't have calipers or you'd already have measured it yourself, so wrap a string around the pipe then measure it... that's your C. <p>C=D*pi<p>Solve for Diameter. <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/embeer.gif" BORDER="0">
 

·
Registered
Joined
·
4,563 Posts
Re: (mattdoc)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>mattdoc</b> »</i></TD></TR><TR><TD CLASS="quote">I'm assuming you don't have calipers or you'd already have measured it yourself, so wrap a string around the pipe then measure it... that's your C. <p>C=D*pi<p>Solve for Diameter. <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/embeer.gif" BORDER="0"> </TD></TR></TABLE><p>Make sure you do the solution prior to the <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/embeer.gif" BORDER="0"> or it may just come out all wrong. <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/biggrin.gif" BORDER="0">
 

·
Registered
Joined
·
77 Posts
Re: What is the inlet size on the rusty EVOLVE tips? Want to replace them... (Percy311)

Very interested on what you find out since mine are rusting too and i want to replace them. I am looking into purchasing some quad tips but just need to know the inlet size first and whether they would even fit with the dynamic trim kit.
 

·
Registered
Joined
·
380 Posts
Discussion Starter · #9 ·
what do you think??<br><IMG SRC="http://www.truckcustomizers.com/images/prods/MBR/E9MBR212.01.jpg" BORDER="0">
 
1 - 9 of 9 Posts
Top