SwedeSpeed - Volvo Performance Forum banner

V60CC Load Carrier Question

3K views 7 replies 5 participants last post by  johnauten 
#1 ·
Hi folks, I've found several posts with peoples experiences on different bars, noise levels etc. but I'm not clear if I can use the v60 bars on the cc? I am trying to figure which bar to by that will fit and is the style where the bar does not extend past the mounting clips (do not want the first link below).

Under the product listings I only see the carrier 31664414 - https://accessories.volvocars.com/en-us/V60 Cross Country(-18)/Accessories/Document/VCC-499476/2018


Neither of the below list the CC but S60CC is? and the Thule listing looks like the various styles are compatible? Are the rails different on the S60CC vs V60CC?

S60 and V60
https://www.volvooempartsdirect.com...r-31454710?c=bD0zNiZuPUR5bmFtaWMgU0VPIFBhZ2U=


https://www.volvooempartsdirect.com...s-31454711?c=bD0yOSZuPUR5bmFtaWMgU0VPIFBhZ2U=


Thule site


Looking for a concrete type of "get this it will fit" part # if anyone has them, thanks.
 
See less See more
4
#2 ·
AFAIK, the V60cc and the V60 have the same integrated rails.

I have PN 31454719 on my V60. They are the so called 'Wing Profile' and they mount on the car's integrated rails. They are manufactured by THULE and the same as their ARB47 Aeroblades with Rapid Podium foot..
Much cheaper to get them from Volvo than from Thule.

31454711 and the other ones are for the S60 that is not equipped with integrated rails. I personally would not consider them since they interfere with the door seals and do not look neat.
 
#5 ·
They do extend a little past the rails. You can always saw them it bothers you. Simply pop the caps back on once your cut is made.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top