SwedeSpeed - Volvo Performance Forum banner
1 - 20 of 23 Posts

·
Registered
Joined
·
16,971 Posts
Discussion Starter · #1 ·
Ok Two full sets of R calipers Front and rears. <p>Pricing as follows <p>Full set front and rear $650 + shipping <br>Fronts only $400 + shipping <br>Rears only $400 + shipping <p>Pricing is OBO espically if your picking up or if your a repeat buyer . <p><IMG SRC="http://i267.photobucket.com/albums/ii298/R410a/Calipersandsuch003.jpg" BORDER="0"><br><IMG SRC="http://i267.photobucket.com/albums/ii298/R410a/Calipersandsuch004.jpg" BORDER="0"><br><IMG SRC="http://i267.photobucket.com/albums/ii298/R410a/Calipersandsuch005.jpg" BORDER="0"><br><IMG SRC="http://i267.photobucket.com/albums/ii298/R410a/Calipersandsuch006.jpg" BORDER="0"><br><IMG SRC="http://i267.photobucket.com/albums/ii298/R410a/Calipersandsuch008.jpg" BORDER="0"><br><IMG SRC="http://i267.photobucket.com/albums/ii298/R410a/Calipersandsuch009.jpg" BORDER="0"><br><IMG SRC="http://i267.photobucket.com/albums/ii298/R410a/Calipersandsuch010.jpg" BORDER="0"><br><IMG SRC="http://i267.photobucket.com/albums/ii298/R410a/Calipersandsuch011.jpg" BORDER="0"><p>Any questions just ask if you need shiping price I am located at 17111 <br>Just put your Zip in the thread and I will get back to you next day . <p>Everything is packed and ready to go so just need paypal and there yours <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/biggrin.gif" BORDER="0">
 

·
Registered
Joined
·
6,887 Posts
How hard is it to get an R brake system to work on an S40? What all would I need besides these? Feel free to treat me like a kindergarten kid because that am what I am when it comes to brakes and mechanical stuff.<br>Also, out of curiosity any interest in some sort of deal involving the 20" Asanti AF120s (or anything else I have listed for sale)?
 

·
Registered
Joined
·
16,971 Posts
Discussion Starter · #3 ·
no 20" wheels lol tires are just to expensive for me . <p>Not sure what it would take other then brakets if they would work . <p>If there is a S40 near me / 17111 I can take alook and see if it would work . <p>I have done / made custom brake setups for the Gen 1 crowd using Wilwoods so ? <p>I know the fronts wont work on a Gen 1 due to offset and such rears with brakets work on the rears.
 

·
Registered
Joined
·
1,500 Posts
Re: (carreragt7)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>carreragt7</b> »</i></TD></TR><TR><TD CLASS="quote">How hard is it to get an R brake system to work on an S40? What all would I need besides these? Feel free to treat me like a kindergarten kid because that am what I am when it comes to brakes and mechanical stuff.<br>Also, out of curiosity any interest in some sort of deal involving the 20" Asanti AF120s (or anything else I have listed for sale)?</TD></TR></TABLE><br>+1 on the s40 interest and being a kid
 

·
Registered
Joined
·
10,560 Posts
Re: (kpsingh0)

FYI, the black "R"s can be removed to expose the light silver ones...<p>ZOMG! You're wearing sneakers?! You feeling alright, kiddo?
 

·
Premium Member
Joined
·
5,242 Posts
Re: (AthruC)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>AthruC</b> »</i></TD></TR><TR><TD CLASS="quote">FYI, the black "R"s can be removed to expose the light silver ones...<p>ZOMG! You're wearing sneakers?! You feeling alright, kiddo?</TD></TR></TABLE><p>black Rs? what an interesting concept!
 

·
Registered
Joined
·
16,971 Posts
Discussion Starter · #7 ·
Re: (AthruC)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>AthruC</b> »</i></TD></TR><TR><TD CLASS="quote">FYI, the black "R"s can be removed to expose the light silver ones...<p>ZOMG! You're wearing sneakers?! You feeling alright, kiddo?</TD></TR></TABLE><p>Hey today was engine removal day <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/biggrin.gif" BORDER="0"> <br><IMG SRC="http://i267.photobucket.com/albums/ii298/R410a/Calipersandsuch001.jpg" BORDER="0">
 

·
Registered
Joined
·
6,887 Posts
Re: (Chilled Man)

So basically just these and rotors hypothetically? Sending you an IM...
 

·
Registered
Joined
·
16,971 Posts
Discussion Starter · #9 ·
And brakets for a s40 . <p>For a 01+ S60 or V70 its just these and rotors <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/biggrin.gif" BORDER="0"> and depeding what car some new dust shields
 

·
Registered
Joined
·
6,887 Posts
Re: (Chilled Man)

How hard is it to fabricate/get brackets to fit? Estimated cost?
 

·
Registered
Joined
·
16,971 Posts
Discussion Starter · #11 ·
Re: (carreragt7)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>carreragt7</b> »</i></TD></TR><TR><TD CLASS="quote">How hard is it to fabricate/get brackets to fit? Estimated cost?</TD></TR></TABLE><p>$150 per set of brakets. <p>The real question is if it will work . <p>if you can get me a Hub for your car I can check to see it will work. <p>
 

·
Registered
Joined
·
8,379 Posts
Re: (carreragt7)

fabricate/get brackets to fit - that shouldn't be to Bad , Mag Clearance ?<br>ABS ? , Brake Pad Sensor ?<p>Brake Pressure Balance ?<p><br>It Should Be Done and Tested , Then - He can Sell and Manufacture the <br>Brake Caliper Swap-Out Kit . <p>( TEST MULEs ) - Needed <IMG NAME="icon" SRC="http://********************/smile/emthup.gif" BORDER="0">
 

·
Registered
Joined
·
16,971 Posts
Discussion Starter · #13 ·
Anyhow <p>$150 for shipping to either Tiwian or Tipay or Shanghi . <p>USPS
 

·
Registered
Joined
·
16,971 Posts
Discussion Starter · #14 ·
weekend bump ...... make offers they need to go <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/biggrin.gif" BORDER="0">
 

·
Registered
Joined
·
1,844 Posts
you've got PM
 

·
Registered
Joined
·
11,628 Posts
Re: (IwantaS60R)

Not sure if these are still around, but a bump is needed because of their coolness.
 

·
Registered
Joined
·
16,971 Posts
Discussion Starter · #17 ·
yeah still hanging out , you should buy a set for your XC <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/biggrin.gif" BORDER="0">
 

·
Registered
Joined
·
11,628 Posts
Re: (Chilled Man)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>Chilled Man</b> »</i></TD></TR><TR><TD CLASS="quote">yeah still hanging out , you should buy a set for your XC <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/biggrin.gif" BORDER="0"> </TD></TR></TABLE><p> <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/biggrin.gif" BORDER="0"> , what would you suggest I say to the "ol' battle axe" to convince her she needs new calipers (the XC is her car you know).
 

·
Registered
Joined
·
29 Posts
Re: (850arrrsaylikepirate)

I got the genuine volvo 17" wheels will they fit under those?<br>mmm keen but pads and rotors and calipers, thinking this is getting expensive!
 

·
Registered
Joined
·
16,971 Posts
Discussion Starter · #20 ·
Re: (850arrrsaylikepirate)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>850arrrsaylikepirate</b> »</i></TD></TR><TR><TD CLASS="quote"><p> <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/biggrin.gif" BORDER="0"> , what would you suggest I say to the "ol' battle axe" to convince her she needs new calipers (the XC is her car you know).</TD></TR></TABLE><p>Tell her incase a kid runs out to get a ball she will now not hit the kid compared to her stock brakes where she has a good chance <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/biggrin.gif" BORDER="0"> <p><br>Figure for pricing. <p>Calipers $650 <br>Rotors $400<br>Break Pads $150<br>+ shipping <br>Your going from one piston all around 4 total to 4pisiton all around to a total of 16 pistons. <p>Its a huge upgrade. <p>I did a BBK front and rear on my 98R and OMG its like hitting a brick wall when you lock them up <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/biggrin.gif" BORDER="0">
 
1 - 20 of 23 Posts
Top