SwedeSpeed - Volvo Performance Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2,401 Posts
Discussion Starter · #1 ·
Hey i know there is a link for a turbo inlet porting. i have searched for 2 days and still cant find it. do you guys know the link. casue that woudl be great. Also do you think its worth porting the inlet. i know it will let the turbo spool faster.
 

·
Registered
Joined
·
18,762 Posts
Re: Turbo inlet porting (p0cket penguins)

Do you mean this thread?<p><A HREF="http://forums.swedespeed.com/zerothread?id=55105" TARGET="_blank">http://forums.swedespeed.com/zerothread?id=55105</A>
 

·
Registered
Joined
·
226 Posts
Re: Turbo inlet porting (p0cket penguins)

You can use the "Extrude Hone" process for porting the turbo as well as you intake and exhaust manifolds. Always wanted to do it, but the cost is out of my reach, to take apart the engine and the cost of the actual Extrude Hone Process. Extrude Hone was used on the Ford Contour SVT's in mass production. Here is a link to a good article of what Extrude Hone does.<p><A HREF="http://www.superstreetonline.com/techarticles/3227" TARGET="_blank">http://www.superstreetonline.com/techarticles/3227</A>/<p><A HREF="http://www.extrudehone.com" TARGET="_blank">http://www.extrudehone.com</A>/
 
1 - 3 of 3 Posts
Top