SwedeSpeed - Volvo Performance Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
839 Posts
Discussion Starter · #1 ·
hey guys,

so after changing my oil not too long ago i noticed a fair amount of oil on my IC, the hotside inlet. (or the right side inlet, if you were looking at it from the front.)
its really bugging me so i want to get a catch can for all the crude/excess oil, but i dont know where to start. i've googled up all the materials needed, but have no idea where the lines are in our cars. can anyone point me in the right direction?
and in conjunction with oil lines/ vacuum lines, i also wanted to run seafoam thru the intake and crankcase.
p.s. i'll post pics and stuff :)
 

·
Registered
Joined
·
9,122 Posts
I believe shadow had a pretty detailed thread going about the same concept, would have to find it, it was from at least a year or two ago I'm guessing.
 

·
Registered
Joined
·
82 Posts
Why go through the hassle of building one piece by piece ... I'd go with a kit ... that way it has all the fittings/lines plus instructions. I built one on my '88 Merkur XR4Ti years ago and it was more of a pain than the $20 I saved instead of a kit.
 

·
Registered
Joined
·
3,256 Posts
ViVa has the simota kit for $89.....
 
1 - 4 of 4 Posts
Top