SwedeSpeed - Volvo Performance Forum banner
1 - 2 of 2 Posts

·
Moderator
Joined
·
6,444 Posts
Discussion Starter · #1 ·
Today I replaced my worn transmission mount bushing (the bigger one) with the one that IPD provides. I also noticed that the small one is cracked, but IPD does not provide a replacement. How do you guys cope with that/? I don't want to put a stock one on there because that one will most definitely crack, just like this one did. Any suggestions?
Thanks
 

·
Moderator
Joined
·
6,444 Posts
Discussion Starter · #3 ·
Re: Transmission mount bushing (Garnetmica)

Quote, originally posted by Garnetmica »
Let it go...Word has it that if both bushings were replaced with poly the vibrations are insane. You could experiment by getting a tube of windshield adhesive and filling the void around the small bushing, allow it to cool and install...

Yea I did notice a bit more vibrations when I put on the bigger bushing, but it's nothing to be concerned about.
I think I might fill the small one with polyurethane.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top