SwedeSpeed - Volvo Performance Forum banner

Torque for wheel bolts ?

825 Views 4 Replies 4 Participants Last post by  Johann
What torque setting should I use for my tethys wheels on my T5 as I couldn't find this info in the handbook

thanks

David
1 - 5 of 5 Posts
ABout 100 ft-lb. See http://www.volvospeed.com/Torque_specs.htm

Make sure you tighten them in a star pattern (preferrably in steps) so you don't warp the rotors.
quote:

Originally posted by T5 Dave:
ABout 100 ft-lb. See http://www.volvospeed.com/Torque_specs.htm

Make sure you tighten them in a star pattern (preferrably in steps) so you don't warp the rotors.
Wow! That's a lot! The C70 setting is only 81 ft-lb.
FYI dealer said 110Nm or 85 ft/lbs....
quote:

Originally posted by volvowna:
FYI dealer said 110Nm or 85 ft/lbs....
Should be ~135 Nm = 100 lb...

The newer wheels seem to come off when you use 110/85.....
See less See more
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top