SwedeSpeed - Volvo Performance Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
313 Posts
Discussion Starter #1
as if the 6series wasn't bad enough as it was.... <IMG SRC="http://www.swedespeed.com/ubb/rolleyes.gif"><BR> <IMG SRC="http://g2.roadfly.org/gallery/photos/photos-05-2002/8026.jpg"> <BR><P>
 

·
Registered
Joined
·
300 Posts
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by omega6_virus:<BR><B>I would think so. I don't know how a driver would get both teddy bears to both be in the correct position like that.</B><HR></BLOCKQUOTE><P>Hmm, notice that the balance weight is the same size and same location for each tire just to the lower left of the valve stem and that we can't see the front calipers through the bear's arms.
 

·
Registered
Joined
·
6,564 Posts
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by turboale:<BR><B>as if the 6series wasn't bad enough as it was.... <IMG SRC="http://www.swedespeed.com/ubb/rolleyes.gif"><BR></B><HR></BLOCKQUOTE><P>I think the wheels will look good on this car if the car is pink. <IMG SRC="http://www.swedespeed.com/ubb/biggrin.gif">
 

·
Registered
Joined
·
314 Posts
The image is definately Photoshopped, just look at the lighting- coming from the wrong direction. If my memory serves me correctly, the Ronal Bear wheels were made for the ladies, and only made in a 6"x14" or 6"x15" size for the Mazda Miatas.<P>-he who stacks pork
 

·
Premium Member
Joined
·
322 Posts
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Leopold Porkstacker:<BR><B>If my memory serves me correctly, the Ronal Bear wheels were made for the ladies, and only made in a 6"x14" or 6"x15" size for the Mazda Miatas.<P></B><HR></BLOCKQUOTE><P>Hey watch it! <IMG SRC="http://www.swedespeed.com/ubb/wink.gif"> Actually you are most likely to see them on VW Beetles<P><P>
 
1 - 11 of 11 Posts
Top