SwedeSpeed - Volvo Performance Forum banner
1 - 2 of 2 Posts

39 Posts
Discussion Starter · #1 ·
I removed the plastic engine cover on my T6 that hides the engine and discovered:
  • The top of the engine was dirty with obvious oil spill, probably from careless filling that allowed the oil to run down the outside of the funnel
  • The protective sleeves on almost all of the wiring harness to the coils, injectors and various sensors have become brittle and have started to disintegrate (see photo)

My question pertains to the wiring harness and disintegrated protective sleeves -- is this a problem (or potential problem) and should I locate suitable sleeving and fit / replace the old and brittle sleeves?
1 - 2 of 2 Posts