SwedeSpeed - Volvo Performance Forum banner

STL file: 3D printed phone holder

3.9K views 4 replies 4 participants last post by  hevas1  
#1 ·
Good day,

i was searching for a good phone holder, which is not mounted on air flow vents and is easily accessible from passenger side also. There was not much of a choice.
So i made one. The clip is mounted near the LCD, but is not covering it.

Hope somebody will find it usefull :)

Volvo XC60 phone holder by jesusninja

Image


Image


Image



Best regards,
Jani
 

Attachments

#2 ·
Yes! I've printed this out, and epoxied a magnet mount onto it. It works great. The only thing I wish for (because of the magnet mount) is that the bottom actually clipped into the top edge of the vent (currently it can sort of be flexed and pulled out). If I had the 3D modeling skills I'd make a modified version of that file. But anyway, works great!
I may 3d print another one and get a mount similar to the one on the picture.
 
#3 ·
THANK YOU!!
 
owns 2013 Volvo XC90 AWD Platinum
#4 ·
I am glad you find it useful. I agree with clipping at the vents, but i couldn't find a proper way to do it without interfering with vent functionality.
Is not the best solution but i would go with two-sided adhesive tape, you probably already did this 😅
 
#5 · (Edited)
Good day,

i was searching for a good phone holder, which is not mounted on air flow vents and is easily accessible from passenger side also. There was not much of a choice.
So i made one. The clip is mounted near the LCD, but is not covering it.

Hope somebody will find it usefull :)

metallic epoxy flooring phoenix

View attachment 149546

View attachment 149547

View attachment 149548

polished concrete floors Atlanta
Best regards,
Jani
Does anyone have a solution to not having my S21 in the charging 'slot' on my new ioniq? Perhaps a 3d printed holder???