SwedeSpeed - Volvo Performance Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Still looking for a scrap B234F ('89 & '90 740GLE twincam) cylinder head for race car project. Need to cut one up to see where water jackets are located and what wall thickness is on intake/exhaust ports. Would rather not cut up usable core or good head as these heads are already too rare.<br>Please forward any possible leads to possible source. Including Volvo shops that might have changed out a bad one and still has core laying around. Can either reply to this post or E-mail at sduchene-at-mindspring.com<p>Also need an extra cam cover for same head.<p>Thanks<p>Steve<BR><BR>
[Modified by tevend, 10:30 AM 9-22-2002]
 
1 - 1 of 1 Posts
Top