SwedeSpeed - Volvo Performance Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
4,638 Posts
Discussion Starter · #1 ·
Hi Everyone,<p>So there's a lot of complaints that there aren't enough gauge pod options for our Rs and Volvo's in general. Well I got to thinking and I really didn't care too much for what was available either <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/tongue.gif" BORDER="0"> So here is my dual gauge pod for the center dash speaker:<br><IMG SRC="http://i21.photobucket.com/albums/b298/puredrive07/boostgaugepod003.jpg" BORDER="0"><br><IMG SRC="http://i21.photobucket.com/albums/b298/puredrive07/boostgaugepod004.jpg" BORDER="0"><br><IMG SRC="http://i21.photobucket.com/albums/b298/puredrive07/boostgaugepod005.jpg" BORDER="0"><p><IMG SRC="http://i21.photobucket.com/albums/b298/puredrive07/boostgaugepod006.jpg" BORDER="0"><br><IMG SRC="http://i21.photobucket.com/albums/b298/puredrive07/boostgaugepod007.jpg" BORDER="0"><p><IMG SRC="http://i21.photobucket.com/albums/b298/puredrive07/boostgaugepod010.jpg" BORDER="0"><br><IMG SRC="http://i21.photobucket.com/albums/b298/puredrive07/boostgaugepod011.jpg" BORDER="0"><br><IMG SRC="http://i21.photobucket.com/albums/b298/puredrive07/boostgaugepod012.jpg" BORDER="0"><br><IMG SRC="http://i21.photobucket.com/albums/b298/puredrive07/boostgaugepod013.jpg" BORDER="0"><br>This is still a work in progress, because I would like to fiberglass the bumps off the pod and make everything smooth plastic to match the rest of the interior pieces.
 

·
Registered
Joined
·
1,537 Posts
Re: So not enough gauge pod options?.... (PureDrive07)

You should have used this gauge pod for a WRX. I did the same thing on mine. The first pictures is in my car, and the second is where i got the idea from. The car is "xenophobic's" and he has since sold his car.<p><IMG SRC="http://i3.photobucket.com/albums/y64/lockheed2266/POD.jpg" BORDER="0"><br><IMG SRC="http://img124.imageshack.us/img124/2831/final22tu.jpg" BORDER="0">
 

·
Registered
Joined
·
1,537 Posts
Here is the write-up. <p><A HREF="http://forums.swedespeed.com/zerothread?id=60297" TARGET="_blank">http://forums.swedespeed.com/zerothread?id=60297</A><BR><BR>
<i>Modified by cmurphy2266 at 9:16 PM 7-5-2009</i>
 

·
Registered
Joined
·
4,638 Posts
Discussion Starter · #4 ·
Re: So not enough gauge pod options?.... (cmurphy2266)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>cmurphy2266</b> »</i></TD></TR><TR><TD CLASS="quote">You should have used this gauge pod for a WRX. I did the same thing on mine. The first pictures is in my car, and the second is where i got the idea from. The car is "xenophobic's" and he has since sold his car.<p><IMG SRC="http://i3.photobucket.com/albums/y64/lockheed2266/POD.jpg" BORDER="0"><br><IMG SRC="http://img124.imageshack.us/img124/2831/final22tu.jpg" BORDER="0"></TD></TR></TABLE><p>No offense, I actually don't care for that pod you used, way too big looking for what I wanted. Plus I wanted to retain the center speaker that I have under the grille, hence why I used the a stock speaker grille and cut the metal grille out. Once I fiberglass you will not see the screw holes at all.
 
1 - 5 of 5 Posts
Top