SwedeSpeed - Volvo Performance Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3,706 Posts
Discussion Starter · #1 ·
All the S40 needs is a nice pair of wheels! <IMG SRC="http://www.swedespeed.com/ubb/biggrin.gif"> I tried to show how different combinations would look on the S40. Personally, I think that the Kosei K1 and ATP Spa look the best. <IMG SRC="http://www.swedespeed.com/ubb/biggrin.gif"> Note, all the cars are lowered about 1.5-inches as well. <IMG SRC="http://www.swedespeed.com/ubb/smile.gif"> Sorry for the poor Photoshop quality...<P> <IMG SRC="http://www.geocities.com/drewsrx/wheels2.jpg"> <P> <IMG SRC="http://www.geocities.com/drewsrx/Wheel1.jpg"> <P>-Drew
 

·
Registered
Joined
·
38 Posts
I like the look ... what I'm really looking forward to is getting wheels that are flush with the fender, I hate how the 195's with the existing offset leave the wheels tucked in.<P>Right now I'm seriously looking at Mas Roger (or president), Fittipaldi Polaris and the (somewhat controversial) Mas Sagittas. I haven't found out if they have done a fitting to the s40's offset but they are available in 4x114.3<P><BR>MAS Roger (not sure if it is in 4x114.3)<BR><img src=http://www.maswheels.com/images/rogernocap.jpg"><P>MAS Sagitta (this is a love/hate thing, lots of people really dislike this wheel. it's similar to the Konig Divas)<BR><img src=http://www.maswheels.com/images/sagitta.jpg><P><BR>I'm probably go with 16" rims this time with 205/50/16. going with 40s and 45s are kind of a pain for me given how bad the roads are and how easy it is to bend a rim. If I do go with 17's, the first wheel I'm going to research is the OZ Vela though to see if it will fit.<P><img src="http://www.ozwheels.com/images/Vela_bigpic.jpg">
 

·
Registered
Joined
·
3,706 Posts
Discussion Starter · #3 ·
I think that the OZ Vela's look great. If you want to post pictures you need to use UBB code instead of HTML like this...
<IMG SRC="http://www.swedespeed.com/ubb/biggrin.gif"><P> <IMG SRC="http://www.ozwheels.com/images/Vela_bigpic.jpg"> <P>-Drew
 
1 - 3 of 3 Posts
Top