SwedeSpeed - Volvo Performance Forum banner

1 - 8 of 8 Posts

·
Registered
2001 S60 2.4T
Joined
·
37 Posts
Discussion Starter · #1 ·
who's running RSI rods, and what length did you get? I'm looking at getting stock (LPT) and having trouble figuring out if it's the 137m or the 143
 

·
Registered
Joined
·
1,180 Posts
dunno if anyone here as built the bottom end of an LPT motor. Ask around on VS, chuck or johann in particular. How's the 16t on your motor btw? bend some rods? <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/wink.gif" BORDER="0">
 

·
Registered
2001 S60 2.4T
Joined
·
37 Posts
Discussion Starter · #4 ·
no bent rods, but the 19t I'm putting in...
 

·
Registered
Joined
·
16,945 Posts
Re: (rbodor3)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>rbodor3</b> »</i></TD></TR><TR><TD CLASS="quote">no bent rods, but the 19t I'm putting in...</TD></TR></TABLE><p> <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/biggrin.gif" BORDER="0"> nice I am doing the same but screw the rods engine has 170k on it <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/biggrin.gif" BORDER="0">
 

·
Registered
Joined
·
1,020 Posts
Re: (rbodor3)

No rods needed on LPT with 19T or K24 unless you have a bad tuner. <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/wink.gif" BORDER="0">
 

·
Registered
Joined
·
1,180 Posts
Not everyone can fly in volvo gods for their tuning <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/biggrin.gif" BORDER="0">
 
1 - 8 of 8 Posts
Top