SwedeSpeed - Volvo Performance Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
47 Posts
Discussion Starter · #1 ·
what are the torque settings <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/confused.gif" BORDER="0"> to tighten 2 bolts to car not the adjuster nuts!
 

·
Registered
Joined
·
9,114 Posts
Re: rear camber arms (marcm1)

Tight <IMG NAME="icon" SRC="http://********************/smile/emthup.gif" BORDER="0"> <p>I use the bap system with my impact gun so ima say 2 or 3 baps on the mid setting with a 3/8" impact gun <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/biggrin.gif" BORDER="0"> <p>But seriously throw a 3/8 rachet on there and get it tight. Doubt you'll over torque it unless your the strongest man alive.
 

·
Registered
Joined
·
4,024 Posts
Re: rear camber arms (ForceFed Motorsports)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>ForceFed Motorsports</b> »</i></TD></TR><TR><TD CLASS="quote">Tight <IMG NAME="icon" SRC="http://********************/smile/emthup.gif" BORDER="0"> <p>I use the bap system with my impact gun so ima say 2 or 3 baps on the mid setting with a 3/8" impact gun <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/biggrin.gif" BORDER="0"> <p>But seriously throw a 3/8 rachet on there and get it tight. Doubt you'll over torque it unless your the strongest man alive.</TD></TR></TABLE><p>I don't like u LOL <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/biggrin.gif" BORDER="0">
 

·
Registered
Joined
·
4,024 Posts
How exactly do you install the arms.... As in do you have to remove rear springs and/or sway bar ? to get the new arms in ?
 

·
Registered
Joined
·
2,424 Posts
Re: (jdsr917)

IIRC, I used another jack to hold up the whole wheel assembly and relieve the tenson off the control arm.
 
1 - 5 of 5 Posts
Top