SwedeSpeed - Volvo Performance Forum banner
1 - 1 of 264 Posts

· Registered
12 Posts
When I have a little extra money I'm going to get some stuff and do this guy's method on the s60.
A couple notes about the video:
- if you start with the 1500, dry and inspect the lens very carefully. It may have small nicks or deeper scratches which will require a much coarser grit to remove. I started with 400 and worked my way back up
- be patient with each stage. When you think you are done, clean and dry the surface and inspect it to see if it is uniform. You may have to go back over it to get spots you missed

I also used the 3M paint protection film on my lights (2008). A year later and the lights still look brand new!

Sent from my iPhone using Tapatalk
1 - 1 of 264 Posts