SwedeSpeed - Volvo Performance Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
1,433 Posts
Discussion Starter · #1 ·
does anyone else make a lightened stock or underdrive pulley for our cars? if i remember, Svenske/Alamo had troubles sourcing a belt for an underdrive pulley so they made a lightweight aluminum stock sized pulley...i've read archived threads and gathered a lot of info on them -- just something im considering for the far, far future [after the more important stuff is done]. <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/tongue.gif" BORDER="0"><BR><BR>
<i>Modified by Cicada at 11:30 AM 8-6-2006</i>
 

·
Registered
Joined
·
6,037 Posts
Re: Pulleys (Cicada)

it is made by UR and does not need a different belt. I did a how to on this about 6 or 7 months ago but may be hard to search for.
 

·
Registered
Joined
·
1,964 Posts
Re: Pulleys (R_Rated)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>R_Rated</b> »</i></TD></TR><TR><TD CLASS="quote">it is made by UR and does not need a different belt. I did a how to on this about 6 or 7 months ago but may be hard to search for.</TD></TR></TABLE><p>Mine came in the mail yesterday so I am interested in this thread as well. <p> <IMG NAME="icon" SRC="http://********************/smile/emthup.gif" BORDER="0">
 

·
Registered
Joined
·
1,433 Posts
Discussion Starter · #5 ·
Re: Pulleys (p0cket penguins)

you can order them from unorthodox racing...they run about $212 i believe.<p>range, where did you order yours from? unless UR's site is out of date, it says that theyre OOS.
 

·
Registered
Joined
·
1,964 Posts
Re: Pulleys (Cicada)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>Cicada</b> »</i></TD></TR><TR><TD CLASS="quote">you can order them from unorthodox racing...they run about $212 i believe.<p>range, where did you order yours from? unless UR's site is out of date, it says that theyre OOS.</TD></TR></TABLE><p>I bought it from 854T5 who was selling the one he had on his car. It is the same one that Svenske was selling a while ago. As soon as my Down Pipe gets here in the mail I will be installing the pulley along with exhaust and the down pipe. I will report back on the results (if it fits or not) later in the week or beginning of next week (8/14). <p>-Will
 
1 - 6 of 6 Posts
Top