SwedeSpeed - Volvo Performance Forum banner

parking brake repaired!

2181 Views 13 Replies 9 Participants Last post by  my2ndimport
I have had problems with my parking brake ever since the shoes delaminated inside the rotor. I installed aftermarket shoes, and new OEM cables. It would not hold on a hill with the adjustment adjusted as tight as it would go.

I recently purchased OEM shoes and hardware (4 springs on each side). Now the parking brake acts like new. 2 clicks and it holds on any hill. My problem seemed to be the aftermarket shoes.

I know others are having similar issues, so I thought I should post.
1 - 1 of 14 Posts
Aftermarket pads (Scantech) do not work well. I had the same exact problem, as have many others. Swapped back to OEMs and have had no problems since. I can't speak for the Meyle pads, but avoid the Scantech. No amount of adjusting will make them hold like the OEMs.
1 - 1 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top