[Yolomcswagicorn]

Im assuming you keep the mileage that is on the cluster, but does the DIM computer still have full functionality when swapped into the car? Still able to get all MPG readouts and all the messages in the bottom left?

 

[PassionateVR]

To be honest I'm not entirely sure what would happen, but my understanding is that if it's 05+ it will automatically recalibrate it to show accurate mileage and data etc. If it's 01-04 then I don't think it will work. Only way you can be certain it will work is by swapping the faces like in this thread:

R-Design Retro Fit Gauges

Hello All. I did this a month ago and am now getting around to uploading pictures and sharing my adventure retro fitting V70R/S60R/XC90 R-Design gauges to my 2005 XC90. First I need to say it was pretty fun and fairly simple. The only real modification required is running the dash led lights to...

forums.swedespeed.com

 

[NoctisM]

Im assuming you keep the mileage that is on the cluster, but does the DIM computer still have full functionality when swapped into the car? Still able to get all MPG readouts and all the messages in the bottom left?

Yes all should function, odometer will continue from where it left off from previous vehicle. Every scan tool more than 30$ will flag as mileage tampered with. (Generally not an issue) The year of the dash must match the year of the car, otherwise it doesn’t like it, unless you wanna do some CANbus hacking but more trouble than it’s worth.


Sent from my iPhone using Tapatalk

 

[NoctisM]

O4 r dash on my 04 T5M still working like a charm 10 years later


Sent from my iPhone using Tapatalk

 

[MooseMuscler7]

P2 Volvo "watch dial" executive cluster that came out of an 07 XC70. Essentially an R cluster with black anodized dials instead of blue. Some very minor scratches are present on the clear plastic housing, but aren't very noticeable. I believe they should be plug and play for 05+, but swapping the gauge faces is required for 01-04.

Asking $60 OBO with either local pick up in 02493 or shipping at buyer's expense.
View attachment 175558 View attachment 175557 View attachment 175556

Are you sure this is for an XC70 and not an XC90? looks like the mounting points are for an XC90 gauge cluster (I could have this backwards). Double check because the outside housing is not plug an play from XC90 to XC70 different mounting points. You can switch the internals over, I would recommend this due to keeping your original mileage on the gauge cluster.

 

[MooseMuscler7]

Im assuming you keep the mileage that is on the cluster, but does the DIM computer still have full functionality when swapped into the car? Still able to get all MPG readouts and all the messages in the bottom left?

Yes everything will work except the front LED's lighting up the front of the dials and you'll just have the mileage from the new cluster displayed. You can just swap over the internals from your original clusters with new dials, little bit of soldering to get the front LED's to work.

 

[MooseMuscler7]

O4 r dash on my 04 T5M still working like a charm 10 years later


Sent from my iPhone using Tapatalk

You swapped the front LED's to blue? Where'd you get the Blue LED's? Did you have to do some soldering to get the front LED's to work?

 

[PassionateVR]

Are you sure this is for an XC70 and not an XC90? looks like the mounting points are for an XC90 gauge cluster (I could have this backwards). Double check because the outside housing is not plug an play from XC90 to XC70 different mounting points. You can switch the internals over, I would recommend this due to keeping your original mileage on the gauge cluster.

Absolutely positive that it came from an XC70 and had thought it was compatible with all P2 platform cars, but I could be wrong. Definitely from an XC70 though.

 

[Phixion]

This is a great deal for some quality and slick looking gauges. I put them in my '04 S60 and mine were from an XC70 (MY06 I believe). For pre facelift S60s, you'll definitely need to swap the gauge faces out for your originals as the plug on the back is different, pre facelift have a green harness plug and connector on the back of the DIM cluster, 05+ have a plug harness and connector. Here's an excellent write up and what I followed when I did mine... And here's a post of mine with pictures on how I soldered my original DIM circuit board to allow the visor LEDs to illuminate and function exactly like they do on the car that it came from, dimmer and all, as well as how to get the message screen to illuminate the same color as the visor and gauge faces bezel trim.

 

[PassionateVR]

bump

 

[PassionateVR]

bump

 

[PassionateVR]

bump

 

[PassionateVR]

Still available, shoot me an offer