SwedeSpeed - Volvo Performance Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3,455 Posts
Discussion Starter · #1 ·
Hi there,<p> I just got my injectors from cleaning and noticed that pintle cups were replaces on two injectors. I noticed that they different in shape and size from what used to be there. I'm little paranoid to install these... Is this normal? I also noticed that they rotates freely and OEM (brown in the picture) sit really tight...<br>Pics below..<p>Any thoughts?<p><br>Before<br> <IMG SRC="http://memimage.cardomain.com/ride_images/1/1643/3721/4106860159_medium.jpg" BORDER="0"> <p>After:<p> <IMG SRC="http://memimage.cardomain.com/ride_images/1/1643/3721/4106860160_medium.jpg" BORDER="0"> <p>Is this normal?<p> <IMG SRC="http://memimage.cardomain.com/ride_images/1/1643/3721/4106860161_large.jpg" BORDER="0"> <p> <IMG SRC="http://memimage.cardomain.com/ride_images/1/1643/3721/4106860162_large.jpg" BORDER="0"> <p>
 

·
Registered
Joined
·
661 Posts
I personally would want them all the same. Not sure if it'll matter but something as important as fuel, I wouldn't take the chance.
 
1 - 3 of 3 Posts
Top