[rise94]

Hi all,
My name is Yann and I live in France,
I have a Volvo V70R AWD 1998 saffron.
My English language is bad and does not allow me to understand everything but recently I opened the forums internationals to exchange information i(well if I can ...).

Hope to read you

My car:

VOLVO V70R AWD 1998
B5234T4 250cv manual

Tyres & wheels

Tyres :Continental sport contact 5 in 215/45/17 91V
Wheels : TZR black mat POWER PLUS silver color original and repainted in satin black (epoxy) with saffron liseret ,in 5x108mm.(Special order in Spain through the company POWER PLUS)

Engine.
Just a panel filter K&N and engine stock for the moment.
Silicone hoses kit intercooler & radiator VENAIR.
Silicone hoses between thermostat housing and expansion tank & Hose between expansion tank and cooland pipe behind engine DO88
Performance Spark Plug Wires by IPD
Distributor & caps BOSCH new
Short shift SNABB

SUSPENSION & STEERING
HD Front Endlink by IPD
Anti-Sway bars. Front and Rear bar kit by IPD. 25mm front, 22mm rear V70 AWD
Kit KW V2
Upper engine stabilizer mount by IPD

EXTERIOR
V70R Black Mesh Grille
Kit headlight ABM in black

INTERIOR
Isotta pedal
MOMO Corse Shift Knob
Tinted glass
3 gauges ZENKY RACING(boost, temp oil and water)

AUDIO
Speakers DYNAUDIO (Mounting VOLVO)
Radio Pioneer DEHP 945R
Pioneer CDRB20 Auxiliary input adapter for P-Bus receivers
Amplifier JL AUDIO HD900/5
Subwoofer Memphis audio 10" ST 104
Ipod 80Go

EXHAUST:
Exhaust system=> 3" home made catback duplex in 3" , with 1 resonnator MAGNAFLOW , 2 Magnaflow 12219 mufflers with tips FOX in 140x90mm(type 32 on catalog deutschland)

BRAKES:
Kit WILWOOD front in 330mm+aviation hoses
Kit WILWOOD rear in 325mm+aviation hoses. I have the kit but it went up on a Volvo 850 FWD and it does not mount on my AWD system.
I have to make new parts machined to fit.


PENDING
R exhaust manifold
ECU UPGRADE

 

[gdill2]

Soyez bienvenus à Swedespeed, Yann.

I see you have already been helpful on the Forum...

http://forums.swedespeed.com/showth...ant-2-for-V70R-AWD-1998&p=1873302#post1873302

...thanks!

If you like, tell us more about yourself here...

http://forums.swedespeed.com/showthread.php?61033-Who-s-Who-on-Swedespeed!

George Dill

 

[rise94]

Hello everybody,


I mounted the angels eyes with LEDs on my headlight ABM.
It illuminates much to my surprise.
I did not pay expensive and obviously it comes from china.

I also bought a kit types BMW angel eyes but it requires the adaption for mounting.

The lighting is gentle on the kit type BMW and very enlightening for the LEDs.

I took in diameter 80mm in 2 cas.LE kit leds up perfectly without any special modification.
The rings were glued with hot glue.










Once glued and finished.