SwedeSpeed - Volvo Performance Forum banner
1 - 12 of 12 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter · #1 ·
Hi..<p>been looking at this forum for a while, finally decidet to up some photos and introduce...2006 s40t5awd, remus exhaust, bsr stage1...<br>here are some pics...sorry did not resize <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/biggrin.gif" BORDER="0"> <br><IMG SRC="http://share.ovi.com/media/Garavac.mymedia/garavac.10004" BORDER="0"><br><IMG SRC="http://share.ovi.com/media/Garavac.mymedia/garavac.10003" BORDER="0"><br><IMG SRC="http://share.ovi.com/media/Garavac.mymedia/garavac.10001" BORDER="0"><p>car is now debadged, and has slotted rotors.<br>Couple of questions:<p>Was thinking about getting intercooler and downpipe. Since i am from croatia, where to get best one (and which) somewhere in europe?<br>also is there any extra cutting needed for fmic?<br>also, i want to lower the car...but not alot...is there a decent set of shocks and springs which would lower the car by 2-3cm.<p>thanks a lot all
 

·
Registered
Joined
·
24 Posts
Discussion Starter · #2 ·
Re: new 2 (garavac)

if the pics dont work you can click here...i hope <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/smile.gif" BORDER="0"> <p><A HREF="http://share.ovi.com/media/garavac.mymedia/garavac.10004" TARGET="_blank">http://share.ovi.com/media/gar...10004</A><br><A HREF="http://share.ovi.com/media/garavac.mymedia/garavac.10003" TARGET="_blank">http://share.ovi.com/media/gar...10003</A><br><A HREF="http://share.ovi.com/media/garavac.mymedia/garavac.10001" TARGET="_blank">http://share.ovi.com/media/gar...10001</A>
 

·
Registered
Joined
·
7,311 Posts
pics and links don't work...says you have to be a member to view them on your host site.
 

·
Registered
Joined
·
24 Posts
Discussion Starter · #5 ·
Re: (garavac)

hope this works<p><A HREF="http://www.freeimagehosting.net/" TARGET="_blank"><IMG SRC="http://www.freeimagehosting.net/uploads/e88378a7d4.jpg" BORDER="0"></A><p><A HREF="http://www.freeimagehosting.net/" TARGET="_blank"><IMG SRC="http://www.freeimagehosting.net/uploads/d794dc29ad.jpg" BORDER="0"></A><p><A HREF="http://www.freeimagehosting.net/" TARGET="_blank"><IMG SRC="http://www.freeimagehosting.net/uploads/114d25a47d.jpg" BORDER="0"></A>
 

·
Registered
Joined
·
159 Posts
Re: (jdsr917)

Welcome! <br>Nice!!<br>I want to see how it looks debadged.<br>Did you change the front grill too?
 

·
Registered
Joined
·
1,363 Posts
Re: (Volvo Fly Girl)

Get some springs on that stat!! <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/eek.gif" BORDER="0"> <p>Lol! Looks great so far! Keep it up! <IMG NAME="icon" SRC="http://********************/smile/emthup.gif" BORDER="0"> <IMG NAME="icon" SRC="http://********************/smile/emthup.gif" BORDER="0">
 

·
Registered
Joined
·
9,122 Posts
Re: (s40boy)

I want your license plates <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/cool.gif" BORDER="0"> <IMG NAME="icon" SRC="http://********************/smile/emthup.gif" BORDER="0">
 

·
Registered
Joined
·
1,310 Posts
I have the H&R springs (35mm drop on FWD). The Eibach is about 30mm I think. Since AWD starts higher, you will have more ground clearance than I do with the same springs. Check out Heico, they're in Germany. I think they sell springs and an expensive downpipe (twice the price of the ATP turbo one in the US)<p><A HREF="http://www.heicosportiv.de/mainframe.asp?lang=en&e1=160" TARGET="_blank">http://www.heicosportiv.de/mai...1=160</A><p><A HREF="http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=CTGY&Store_Code=tp&Category_Code=VC30" TARGET="_blank">http://www.atpturbo.com/Mercha...=VC30</A>
 
1 - 12 of 12 Posts
Top