SwedeSpeed - Volvo Performance Forum banner

My Oil Pan craked, small oil Leak

1763 Views 17 Replies 6 Participants Last post by  echristodo
Man it seems I've been pooring money into this car like crazy lately, I hope it is not too expensive to repair...
BTW I've finished the comets, and I've mounted them, the car looks GREAT!!!
1 - 1 of 18 Posts
JB what?

The only time I used JB weld was when I was patching up my exhaust on my old Suzuki motorcycle. Nothing lost there if it doesn't work. If you're going to JB weld any engine related part then be absolutely sure that you have a clean smooth surface for the stuff to adhere to.

It still can't be as bad as what we've seen Marshall Engine Remanufacturer's do. We once got a 390 Ford for a customer and it looks like they used Bondo on the head to fill in some cracks
. Didn't help that the engine was rebuilt to piece-of-crap standards in the first place.
See less See more
1 - 1 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.