SwedeSpeed - Volvo Performance Forum banner
1 - 3 of 3 Posts

131 Posts
Discussion Starter · #1 ·
Gotta do a couple hoses and the water pump this weekend. My indy uses Rowe Hightec AN coolant in my R and I plan to collect and reuse what I can. I should hopefully be able to collect it all, but if I need to top it off, only fluid that's readily available and HOAT, NAP free and ethylene glycol based is the peak European mix at autozone. Would it be safe to top off with this?

Here's the Rowe that's in it: https://www.bimmerworld.com/Fluids/BMW-Coolant-Antifreeze/Rowe-Hightec-AN-Coolant-Antifreeze-1-Gallon-Jug.html?gclid=Cj0KCQjwrfvsBRD7ARIsAKuDvMMcoZsNkSkqeZkCe_VKiTFVBf3HaBH7gbr6KkTSn9nx30YDRwjaG1MaAqcqEALw_wcB

And what I'm hoping is good to use:
1 - 3 of 3 Posts