[geo1]

I'm hearing a scraping sound similar to brake pads grinding against a rotor. The noise is heard when the car is moving very slow. the strange part is I can't hear it when I'm outside the car walking along side it while it moves. Inside the car it's plain as day. Axle\CV joint?

 

[jlj3394]

Re: Low Speed Scraping Sound..98 S70 FWD (geo1)

I had a mudflap do this. I thought it was the awd going, so tightening the front mudflap was a welcome fix. <p>FWIW.

 

[Taleof2Bricks2]

Re: Low Speed Scraping Sound..98 S70 FWD (geo1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>geo1</b> »</i></TD></TR><TR><TD CLASS="quote">I'm hearing a scraping sound similar to brake pads grinding against a rotor... Axle\CV joint?</TD></TR></TABLE><p>...or a wheel bearing (another <I>possibility</I>)...

 

[geo1]

Re: Low Speed Scraping Sound..98 S70 FWD (Taleof2Bricks2)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>Taleof2Bricks2</b> »</i></TD></TR><TR><TD CLASS="quote"><p>...or a wheel bearing (another <I>possibility</I>)...</TD></TR></TABLE><p>I'm thinking that but its not you typical wheel bearing noise.

 

[gdogg16]

Re: Low Speed Scraping Sound..98 S70 FWD (geo1)

Have done any brake work recently? If so, check the dust shield on the inside of the rotor and make sure it's not touching the rotor. It is common for these to bend and touch the rotor while doing a brake job.