SwedeSpeed - Volvo Performance Forum banner

Jaguar Cygnus Rims on '17 V60 R Design

1998 Views 3 Replies 3 Participants Last post by  BUCHO
While it's not for everyone, I just swapped my black 19" tuning fork Volvo R Design alloy rims and replaced them with 18" Jaguar 6-spoke rims.
I like the look, slightly wider (8.5"), fills out the wheel well better, and easier to clean. Now that I know they fit without modification I can contemplate powder coating the wheels to match the gray of the car. Stock suspension setup. The Cygnus wheels are pretty affordable since they were the stock/basic wheel package on the Jaguar XF.

Before and afters:


Cygnus wheels off 2012 Jaguar XF
Bolt pattern: 5x108 perfect hub-centric fit
Dimensions: 18x8.5"
Offset: +49mm
Centerbore: 63.4mm.
The conversion did require buying new 14mm wheel bolts without the Volvo integrated tapered washer, and a separate set of 60º-to-flat-seat washers. The new 14mm bolts have a smaller 17mm head with a 60º taper and the wheels have a flat seat. (original Jaguar hubs have flat-seating lug nuts with a 12mm threaded wheel studs.) And Jaguar "R" center caps which are a tiny bit loose, so I have to modify the spring-backs.

Tires Continental Extreme Contact 245-40-18

I am not a fan of the P7s but I have always loved the Extreme Contact DWS 06 Continentals for ride quality. (Granted, I rarely go over 90 in a straight line). American tire Depot in California has a buy3, get 4th free sale on the Contis that was under the cost of everyone I called (4 for $705 mounted and balanced).
See less See more
  • Like
Reactions: 2
1 - 1 of 4 Posts
How big are the rotors on v60? I'm thinking about downgrading to 18 inch on my s90 since the rims keep getting bent and the tire alone is 600 a piece. I have winter 18 rims which barely fits, clears the brake by like 2mm. Not sure if those wheels would be a good choice
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.