SwedeSpeed - Volvo Performance Forum banner
1 - 15 of 15 Posts

·
Registered
Joined
·
284 Posts
Discussion Starter · #1 ·
Another new bodykit for the V50. The front bumber looks pretty good but i dont like the sideskirt, Evolve's sideskirt looks better,<br><A HREF="http://www.realcar.se/servlet/us_pyra?wts.PAGE=h_ix3.htm&wts.ACTION=loginguest&p=H" TARGET="_blank">http://www.realcar.se/servlet/...t&p=H</A><p>M<p><IMG SRC="http://www.realcar.se/images/products/vov50503662.jpg" BORDER="0">
 

·
Registered
Joined
·
89 Posts
Re: (1SOUL)

Front bumper looks alright, but what I like most about the car (and if I could I would do to my car) is the body paint on the headlights; it makes the car look so clean!
 

·
Registered
Joined
·
2,672 Posts
Re: (s40goalie)

yuck. not my style... <p>like the painted headlight interior, though <IMG NAME="icon" SRC="http://********************/smile/emthup.gif" BORDER="0">
 

·
Registered
Joined
·
3,760 Posts
Re: (Kallvin22)

Front is well designed to flow, but its a little on the bubbly bulgey round side that modern cars seem to have so much of these days. A reason for buying the Volvo was the well defined and precisely placed lines.<p>Take your pick:<br> <IMG SRC="http://www.celsias.com/media/uploads/admin/fat_guy_in_car.jpg" BORDER="0"> <p><br> <IMG SRC="http://www.fotosearch.com/bthumb/PDS/PDS148/73980409.jpg" BORDER="0">
 

·
Registered
Joined
·
209 Posts
Re: (1SOUL)

i didnt realize the painted headlight interior until after people commented...<p><br>i tried doing this to mine, but i couldnt open the lens... anyone know how? are they glued shut????
 

·
Registered
Joined
·
168 Posts
Re: (nme95k)

Just use a blowdryer and a flathead screwdriver. Heat the seal until it gets soft and pry open with the flathead. <IMG NAME="icon" SRC="http://********************/smile/emthup.gif" BORDER="0">
 

·
Registered
Joined
·
209 Posts
Re: (1SOUL)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>1SOUL</b> »</i></TD></TR><TR><TD CLASS="quote">Just use a blowdryer and a flathead screwdriver. Heat the seal until it gets soft and pry open with the flathead. <IMG NAME="icon" SRC="http://********************/smile/emthup.gif" BORDER="0"> </TD></TR></TABLE><p><br>have you done it?
 

·
Registered
Joined
·
168 Posts
Re: (nme95k)

Absolutely, I did it multiple times because I wanted to paint my headlight corners and couldn't finish it in one night. <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/tongue.gif" BORDER="0">
 

·
Registered
Joined
·
209 Posts
Re: (1SOUL)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>1SOUL</b> »</i></TD></TR><TR><TD CLASS="quote">Absolutely, I did it multiple times because I wanted to paint my headlight corners and couldn't finish it in one night. <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/tongue.gif" BORDER="0"> </TD></TR></TABLE><p><br>how would i seat it back up? clear silicon? <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/confused.gif" BORDER="0">
 
1 - 15 of 15 Posts
Top