SwedeSpeed - Volvo Performance Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
694 Posts
Discussion Starter · #1 ·
Emailed IPD 3 weeks ago about my sway bar being a defect like some others had back from the group buy in March, finally get a response saying they will be sending me a new one this week. Yesterday I opened up the box so I could swap them out, except some things were different...<p>1. The new bolts are obviously larger in diameter and length, not sure if these are the correct ones...<br><IMG SRC="http://i611.photobucket.com/albums/tt194/loren760/2009-08-08141423.jpg" BORDER="0"><p>2. There were no spacers included in the new hardware, and the old ones will not fit because of the larger diameter bolts.<br><IMG SRC="http://i611.photobucket.com/albums/tt194/loren760/2009-08-08141600.jpg" BORDER="0"><p><br>Not sure if I should use all of the old hardware or if IPD needs to send me spacers. Overall I'm pretty annoyed by this...<br>
 

·
Registered
Joined
·
4,024 Posts
Find LuckyIPD and send him a message he is a great guy and will help you out but please try to be nice to him since he helps alot of us out ! ill find a link with him in there and send him a IM <p><br><A HREF="http://forums.swedespeed.com/zerothread?id=72061&postid=1274496#1274496" TARGET="_blank">http://forums.swedespeed.com/z...74496</A>
 

·
Registered
Joined
·
502 Posts
Interesting!<p>Yea mine had the little bends as well. However, I think i'm just going to try to bend them out myself instead of remove iPd, replace with oem, ship, wait, receive, remove oem, replace with iPd.<p>Bench vises are my friend <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/tongue.gif" BORDER="0">
 
1 - 3 of 3 Posts
Top