SwedeSpeed - Volvo Performance Forum banner
1 - 8 of 8 Posts

·
Premium Member
Joined
·
5,242 Posts
Discussion Starter · #1 ·
Ghetto Intake

EST Ultra-Flo Intake (got used for like $90 last year).<br><IMG SRC="http://www.eurosporttuning.ca/images/volvo/VLE-160-202-T1.jpg" BORDER="0"><br><b>PLUS</b><br>Ghetto metal working skills.<br><IMG SRC="http://z.about.com/d/homerepair/1/0/s/-/-/-/hammer.jpg" BORDER="0"><br><b>PLUS</b><br>Some black paint and primer.<br><IMG SRC="http://ecx.images-amazon.com/images/I/31R22VYFH7L._SL500_AA280_.jpg" BORDER="0"><br><b>PLUS</b><br>3.5 inch (MAF) to 3.0 inch (Filter) coupler.<br><IMG SRC="http://www.siliconeintakes.com/images/product/45_reducer_black_picture.jpg" BORDER="0"><br><b>PLUS</b><br>Original R Kelly Intake, not IPD.<br><IMG SRC="http://www.ipdusa.com/uploads/images_products_large/4155.jpg" BORDER="0"><br><b>PLUS</b><br>A lot of this...<br><IMG SRC="http://cougarblawg.com/wordpress/wp-content/uploads/2008/04/lame.jpg" BORDER="0"><br><b>FINALLY EQUALS</b><br><IMG SRC="http://i11.photobucket.com/albums/a178/Stugger/DSCN0170.jpg" BORDER="0"><br><IMG SRC="http://i11.photobucket.com/albums/a178/Stugger/DSCN0171.jpg" BORDER="0"><br><IMG SRC="http://i11.photobucket.com/albums/a178/Stugger/DSCN0172.jpg" BORDER="0"><br>
 

·
Registered
Joined
·
1,057 Posts
Re: Ghetto Intake (GiRaff3)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>GiRaff3</b> »</i></TD></TR><TR><TD CLASS="quote"><br>A lot of this...<br><IMG SRC="http://cougarblawg.com/wordpress/wp-content/uploads/2008/04/lame.jpg" BORDER="0"><br></TD></TR></TABLE><p>"What'chu talkin bout KIT".lol
 

·
Premium Member
Joined
·
5,242 Posts
Discussion Starter · #4 ·
Re: Ghetto Intake (mad matt)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>mad matt</b> »</i></TD></TR><TR><TD CLASS="quote">Is there no heat sheild for the EST intake?</TD></TR></TABLE><p>The top picture is what the heat-shield supposedly looks like, but it really isn't. They provide you with one that is like a puzzle to fit into place with jagged edges everywhere. I cut it down a bit, folded some edges to make them a bit less dangerous, cut a hole for the "CAI", and painted it black to cover up the beating it took. The shield is there now to hold the "CAI" tube into place so there is another source of air. I am content with running an open filter.
 

·
Registered
Joined
·
2,621 Posts
Re: Ghetto Intake (GiRaff3)

I think it looks ok and $310 less than "the other plastic" <IMG NAME="icon" SRC="http://********************/smile/emthup.gif" BORDER="0">
 

·
Premium Member
Joined
·
5,242 Posts
Discussion Starter · #6 ·
Re: Ghetto Intake (Oceans60R)

I figure:<br>I already had the EST intake and R kelly intake.<br>$6 for paint.<br>$20 for that coupler (which I did not need, but the idea of squishing a 3.5 inch coupler down to a 3 inch filter just seemed <IMG NAME="icon" SRC="http://www.vwvortex.com/zeroforum_graphics/screwy.gif" BORDER="0">
 
1 - 8 of 8 Posts
Top