SwedeSpeed - Volvo Performance Forum banner
1 - 13 of 13 Posts

·
Registered
Joined
·
89 Posts
Discussion Starter · #1 ·
<A HREF="http://memimage.cardomain.net/member_images/10/web/2398000-2398999/2398329_3_full.jpg" TARGET="_blank">http://memimage.cardomain.net/...l.jpg</A>
 

·
Registered
Joined
·
279 Posts
You actually ot the 19x11 to fit on the rear with no rubbing? It's a shame we're fwd, cause that staggered setup is going to enhance your understeer.
 

·
Registered
Joined
·
89 Posts
Discussion Starter · #3 ·
Re: If the pics work! 19x8.5's & 19x11"s fit, Are they too much (realsicksince88)

Sweet, they work!. We got bored over the holiday weekend, and just for S & G's, We bolted these up. 19x8.5 +38 w/ 225/35/19's, and 19x11's +35 w/ 255/ 35/19's in the rear. I think these are similar to the ones on Ebay, yet a little different. They do clear everything, up front would need a little flaring and rolling, aka fender liner delete. In the rear there was a sharpie marker clearance around everything, loaded & unloaded.<br> let me know what you guys think, I'm on the fence now, was going to be happy with 17/18's, and now this. <br><A HREF="http://memimage.cardomain.net/member_images/10/web/2398000-2398999/2398329_1_full.jpg" TARGET="_blank">http://memimage.cardomain.net/...l.jpg</A><br><A HREF="http://memimage.cardomain.net/member_images/10/web/2398000-2398999/2398329_5_full.jpg" TARGET="_blank">http://memimage.cardomain.net/...l.jpg</A><br><A HREF="http://memimage.cardomain.net/member_images/10/web/2398000-2398999/2398329_6_full.jpg" TARGET="_blank">http://memimage.cardomain.net/...l.jpg</A><br><A HREF="http://memimage.cardomain.net/member_images/10/web/2398000-2398999/2398329_2_full.jpg" TARGET="_blank">http://memimage.cardomain.net/...l.jpg</A><BR><BR>
<i>Modified by realsicksince88 at 9:40 PM 7-6-2006</i>
 

·
Registered
Joined
·
89 Posts
Discussion Starter · #4 ·
Re: (drPheta)

Yes, It completely goes against my principles for tuning cars, it would most likely mess up the balance. Though seeing that much wheel and lip, kind of makes you wonder.
 

·
Registered
Joined
·
4,395 Posts
Re: (realsicksince88)

That is a lot of wheel.
 

·
Registered
Joined
·
2,035 Posts
Re: (andrewclee)

I like it. I think it looks awsome. May have to try it myslef. Have you driven it around to see where it rubs?<p>Gary
 

·
Registered
Joined
·
89 Posts
Discussion Starter · #9 ·
Re: (yellow95)

The rear is just fine, we had a sharpie marker clearance @ everything (worked for vw/audi), would shift the gas filler tube slightly, just to be safe. The front is a little more work. The fender liner would have to be trimmed / removed, <br> a little fender rolling/ flaring, maybe?<br>These were off a widebody Sema Gti, and just happened to be lurking in my brothers garage. ( bolt pattern is off a bit, or there would be more pics)<br> But there are some interesting Ferrari sets available, spacers would be needed, but, Challenge wheels are 5x108 w/ 50-52mm offsets, <br> We'll see how snowboards and Ebay work out, maybe I'll get a set for xm as.<br>
 

·
Registered
Joined
·
89 Posts
Discussion Starter · #11 ·
Re: (George @ ViVA)

OK, So now I'm thinking more about this now, and I just bought a new set of Volans.<br> What do you need out of these, I'll be a lab rat for 19's for an 850.<br> also, I' ll need front springs for a 96R, let me know what your options are,<br> my Weitec fronts need replaced, love them, but clicking like hell.<p> Also ? may need rear spacers, to even out the fenders, if you have them.<br> Send me a quote, shipped to 17522.<br> Thanks, Scott<br> <br> Possibly FS, 5 Brand New Volans, and a set of MB Motorsport 17's W/ tires<br> & Weitec Cup front springs
 

·
Registered
Joined
·
5,201 Posts
Re: (realsicksince88)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>realsicksince88</b> »</i></TD></TR><TR><TD CLASS="quote">OK, So now I'm thinking more about this now, and I just bought a new set of Volans.<br> What do you need out of these, I'll be a lab rat for 19's for an 850.<br> also, I' ll need front springs for a 96R, let me know what your options are,<br> my Weitec fronts need replaced, love them, but clicking like hell.<p> Also ? may need rear spacers, to even out the fenders, if you have them.<br> Send me a quote, shipped to 17522.<br> Thanks, Scott<br> <br> Possibly FS, 5 Brand New Volans, and a set of MB Motorsport 17's W/ tires<br> & Weitec Cup front springs</TD></TR></TABLE><p>PM sent. <IMG NAME="icon" SRC="http://********************/smile/emthup.gif" BORDER="0">
 
1 - 13 of 13 Posts
Top