SwedeSpeed - Volvo Performance Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
63,542 Posts
Re: I want to black out the B and C pillars, without paint... (icebiker)

 

·
Registered
Joined
·
63,542 Posts
Re: I want to black out the B and C pillars, without paint... (JRL)

Quote, originally posted by JRL »

If you just tape to the top of the pillars, (looks OK but different than the way mine looked) it should be a fairly easy job.
However if you do it the way I did, I don't think a tape job will be that easy, if not impossible to do properly with the amount of blackout I did.
Tape up to the top of the glass, if you like the general look but decide that you want to do it the way I did, then I suggest you have it painted.
This was not an expensive job, even from the pro shop which I used.
 

·
Registered
Joined
·
63,542 Posts
Re: I want to black out the B and C pillars, without paint... (sh8kdwn)

Quote, originally posted by sh8kdwn »


I opted for just the vertical section of the pillars only. There was a lot less material used and it is very simple to do. Just cut the vinyl off even with the window and leave the frame untouched.

Yes, as I said, that is pretty easy to do with tape.
I don't think my way would be easy taping it, just too much of it to do and it would be easy to make constant mistakes.
I assume you taped to the top of the window?
That looks good, I just wanted to do something that at the time no one had done
 

·
Registered
Joined
·
63,542 Posts
Re: I want to black out the B and C pillars, without paint... (icebiker)

Quote, originally posted by icebiker »
A fellow SS'er offered his assistance...gonna do up some templates this weekend to start with.

You don't need a template, just apply and carefully razor off the edges
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top