SwedeSpeed - Volvo Performance Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2,544 Posts
Discussion Starter · #1 ·
Doing some bench tests with new HID bulbs using oem ballast and igniter (from my xc90 - identical to
P2 Real I believe).

Can someone please post the wiring info for the 12V supply and ground - for the 3-pin connector.

This is my test ballast from my xc90:


I have the 2011 EWD but can't figure out how to read pinouts from it.

LTA
 

·
Registered
Joined
·
2,544 Posts
Discussion Starter · #2 ·
BUMP! C'mon guys I know someone has this info.
I've found a cheap way to mod those cheap $5 D2C fleebay bulbs to make them perform better. Need to test the mod on the bench before risking it in my R or XC90. If it works I'll be sharing and posting pics.
 

·
Premium Member
Joined
·
8,700 Posts
BUMP! C'mon guys I know someone has this info.
I've found a cheap way to mod those cheap $5 D2C fleebay bulbs to make them perform better. Need to test the mod on the bench before risking it in my R or XC90. If it works I'll be sharing and posting pics.
I'll get you that pinout info tonight. I have a open ballast on my workstation.
 

·
Registered
Joined
·
2,544 Posts
Discussion Starter · #4 ·
I'll get you that pinout info tonight. I have a open ballast on my workstation.
Thanks man. I probably won't get back at it until the weekend so no rush for tonight. Hope it's just power and ground needed and no PWM baloney to deal with. I just need to fire up a test HID bulb in my old XC90 headlight assembly to see if my D2C bulb mod works and doesn't blow up!

LTA
 
1 - 4 of 4 Posts
Top