SwedeSpeed - Volvo Performance Forum banner
1 - 20 of 97 Posts

·
Registered
Joined
·
1,793 Posts
Discussion Starter · #1 ·
Hey folks!! I'm currently in Germany, and am setting up a Group Buy for these wicked oil filler caps that Volvere has! Quoted below is his post from page 6 of this thread.

Quote, originally posted by volvere »
Actually I organized a group buy on those oil caps here in Finland. It is a specially made one piece solid billet cap with the newer style wheel cap on top of it. Quality made in Sweden.




I can organize a group buy for you U.S guys also. One cap would cost you 50 euros + shipping, about $75-85 including shipping.

Or, if someone from U.S wants to handle the group buy order and domestic shipping I can ship the caps in one parcel to him?

Let me know if there any interest for this kind of group buy?


As I stated in that thread, it's much cheaper for me to ship to the States, with the APO mailing thing. The price shipped to me from Volvere is 50 Euro, and then shipped out to the States is around $12. With the conversion, should be $78 -$80 shipped. Ok, so, I will confirm the shipping cost with the Post Office tomorrow, and will update this thread with those interested and the amounts per.

1. FORD420diesel = x2 PAID VOLVERE I.O.ME.

2. Needsdecaf = x1
3. Short Circuit = x1 PAID VOLVERE PAID FORD420
4. 94850tx = x1 PAID FORD420
5. BeerEngineer = x1 PAID VOLVERE PAID FORD420
6. GPollman = x1 PAID VOLVERE PAID FORD420
7. AtacamaR = x1 PAID VOLVERE PAID FORD420
8. Jeremy7o2 = x2 PAID VOLVERE HAND DELIVERING
OR APO-APO
9. T5 for life = x1 PAID VOLVERE PAID FORD420
10. Pshrynk = x1 PAID VOLVERE PAID FORD420
11. baxteR = x2 PAID VOLVERE PAID FORD420
12. ForeverAdvanced = x1 PAID VOLVERE
13. dradernh = x1 PAID VOLVERE PAID FORD420
14. htownturbobrick = x1 PAID VOLVERE PAID FORD420
15. atl36 = x1 PAID VOLVERE PAID FORD420
16. jhalbert = x2 PAID VOLVERE PAID FORD420
17. NickC = x1 PAID VOLVERE PAID FORD420

Here's the payment information from Volvere, further down in this thread. I moved it up here for ease of reading!!

Quote, originally posted by volvere »

I just contacted the manufacturer in Sweden, the next set of caps will be available in about three weeks. So the orders must be made before the sunday April 15th. and all the caps must be paid in advance to my PayPal account.

The caps are just like Giraff3 described, solid billet caps with the wheel cap stuck inside it

And these caps fit all the Volvo engines with the plastic oil filler cap. So for the RWD cars also.
I think you can change the wheel cap for the older model if you want, no problem. But the fitting is so tight that the actual wheel cap won't necessarily come out in one piece.

Here's how to make your order:
- orders to FORD420diesel
- orders before April 15th
- payments to my PayPal account: volvere at luukku.com
- payments in EURO, 50€/cap
- include your SS nickname in the payments notes
- FORD420diesel will give you the instructions for the shipping payments

That's all folks, keep on ordering

So, that's where the 50 Euro needs to go! The $12 for shipping needs to come to me, at [email protected] Thanks all!! http://********************/smile/emthup.gif

Modified by FORD420diesel at 11:40 PM 4-19-2009
 

·
Registered
Joined
·
2,964 Posts
Re: (Needsdecaf)

I'd like one too.
 

·
Registered
Joined
·
469 Posts
Im in!
 

·
Registered
Joined
·
1,793 Posts
Discussion Starter · #6 ·
Re: (C-70)

Quote, originally posted by C-70 »
can you make a some with the old classic black & chrome logo

I can ask Volvere about having a one-off made for you, though I have noo idea on price; I'd imagine it would be more expensive than this one! Although, I imagine it wouldn't be too hard to have one made without the Volvo logo on it at all, and you can spec the insert for the cap? Just speculating, of course...again, I'll ask Volvere and see what can be done, ok?
 

·
Premium Member
Joined
·
5,242 Posts
Re: (FORD420diesel)

Re-editing, ha!

They are a billet cap with wheels caps pushed inside! Pick a center cap that you like and have that put in. If you wanted to really be gangster, you could use an IPD one, or the old black style?

Modified by GiRaff3 at 12:37 PM 3-29-2009
 

·
Registered
Joined
·
122 Posts
Re: (GiRaff3)

Glad to see that the Group Buy is already organized http://********************/smile/emthup.gif

I just contacted the manufacturer in Sweden, the next set of caps will be available in about three weeks.
So the orders must be made before the Sunday April 19th. and all the caps must be paid in advance to my PayPal account.

The caps are just like Giraff3 described, solid billet caps with the wheel cap stuck inside it

And these caps fit all the Volvo engines with the plastic oil filler cap. So for the RWD cars also.
I think you can change the wheel cap for the older model if you want, no problem. But the fitting is so tight that the actual wheel cap won't necessarily come out in one piece.

Here's how to make your order:
- orders to FORD420diesel
- orders before April 17th
- payments to my PayPal account: volvere at luukku.com
- payments in EURO, 50€/cap
- include your SS nickname in the payments notes
- FORD420diesel will give you the instructions for the shipping payments

That's all folks, keep on ordering


PAYMENT RECEIVED FROM:
- BeerEngineer
- Short Circuit
- Jeremy7o2
- T5 for Life
- GPollman
- Pshrynk
- BaxteR
- dradernh
- htownturbobrick
- FORD420diesel
- Foreveradvanced
- 94850tx
- atacamaR
- jhalbert
- atl36


Modified by volvere at 7:49 PM 4-17-2009
 

·
Premium Member
Joined
·
5,242 Posts
Re: (volvere)

Quote, originally posted by volvere »

The caps are just like Giraff3 described, solid billet caps with the wheel cap stuck inside it

And these caps fit all the Volvo engines with the plastic oil filler cap. So for the RWD cars also.
I think you can change the wheel cap for the older model if you want, no problem. But the fitting is so tight that the actual wheel cap won't necessarily come out in one piece.

Wow! I actually deleted my post because I kept looking, and I second guessed myself! I guess I have a better eye than I thought. Would it be possible to just request that they NOT put a center cap in when they are made, and you can leave the person who is purchasing the oil cap to decide which they want to put in? It should make the price a little cheaper because center caps cost a few $$.
 

·
Registered
Joined
·
1,793 Posts
Discussion Starter · #10 ·
Re: (volvere)

Sounds good!!

Yep, I'll just need the $12 to cover shipping, to my PayPal account. It's morsetechnologies at gmail dot com. Yep, I know, retardedly long, but hey...


Cheers!!


-Steve
 

·
Registered
Joined
·
122 Posts
Re: (GiRaff3)

Quote, originally posted by GiRaff3 »


Wow! I actually deleted my post because I kept looking, and I second guessed myself! I guess I have a better eye than I thought. Would it be possible to just request that they NOT put a center cap in when they are made, and you can leave the person who is purchasing the oil cap to decide which they want to put in? It should make the price a little cheaper because center caps cost a few $$.

I think the wheel caps are so cheap in Sweden that they don't make a big difference in price? And most of the buyers prefer the new one compared to the older black one?
 

·
Administrator
Joined
·
55,950 Posts
Re: (volvere)

Does the logo sit properly when the cap is locked in?

Got a pict of it installed an engine?
 

·
Registered
Joined
·
122 Posts
Re: ([email protected])

Quote, originally posted by [email protected] »
Does the logo sit properly when the cap is locked in?

Got a pict of it installed an engine?

The fitting of the logo is very tight, very hard to get it out without breaking it.
Here are some pics of the engine bays:







 

·
Registered
Joined
·
2,964 Posts
Re: (lowenhart)

Just to confirm, I have just sent via PayPal: 50 Euro to Volvere and $12.00 USD to FORD420diesel (Steve).

Please confirm receipt via IM or email. Thanks!
 

·
Registered
Joined
·
415 Posts
Re: Group Buy!! Volvere Custom Oil Filler Caps!! 50 Euro each, plus $12 shipping (FORD420diesel)

These are really cool looking, The materials look to be very high quality, however looking at it installed on the R engine, I would want it to be 1/2 the height. Just my .02.
 
1 - 20 of 97 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top