SwedeSpeed - Volvo Performance Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2,331 Posts
Discussion Starter · #1 ·
B234F 16-Valve head from an '89 740GLE. NO BENT VALVES!!<p>It has been pressure tested and hot-tanked by a machine shop. It could be installed as-is with just a resurfacing. However, about half the valves have carbon buildup, so for a performance engine it would be best to disassemble, do a valve job, and clean the valves to make sure they all seal properly. The head is complete with the cam carrier, cam caps, lifters, valve cover, and all hardware including used head bolts (you'll have to measure to see if they're still within spec). Original sensors are still installed in the head, but not guaranteed to be functional. I also have the camshafts w/gears and a b234f intake manifold with some hardware and FPR, but no injectors.<p>If you're looking to do a 16V turbo engine, this would be a great start. I'm looking for $400/OBO for everything, but I'll consider offers on just the head.<p>Buyer pays shipping from zip code 20170. If you're within a resonable distance from the Washington DC area, I would be happy to drive to meet the buyer so I don't have to ship this head.<p>Thanks,<br>Michael
 

·
Registered
Joined
·
2,331 Posts
Discussion Starter · #2 ·
Re: FOR SALE: B234F 16-Valve Cylinder Head (towerymt)

still available... <IMG NAME="icon" SRC="http://********************/smile/emthup.gif" BORDER="0">
 

·
Registered
Joined
·
1 Posts
234f head

B234F 16-Valve head from an '89 740GLE. NO BENT VALVES!!<p>It has been pressure tested and hot-tanked by a machine shop. It could be installed as-is with just a resurfacing. However, about half the valves have carbon buildup, so for a performance engine it would be best to disassemble, do a valve job, and clean the valves to make sure they all seal properly. The head is complete with the cam carrier, cam caps, lifters, valve cover, and all hardware including used head bolts (you'll have to measure to see if they're still within spec). Original sensors are still installed in the head, but not guaranteed to be functional. I also have the camshafts w/gears and a b234f intake manifold with some hardware and FPR, but no injectors.<p>If you're looking to do a 16V turbo engine, this would be a great start. I'm looking for $400/OBO for everything, but I'll consider offers on just the head.<p>Buyer pays shipping from zip code 20170. If you're within a resonable distance from the Washington DC area, I would be happy to drive to meet the buyer so I don't have to ship this head.<p>Thanks,<br>Michael
I'm interested just on the head, please let me know if you still have and how much
Thanks
[email protected]
770 265 4144
 
1 - 4 of 4 Posts
Top