SwedeSpeed - Volvo Performance Forum banner

1 - 20 of 20 Posts

·
Registered
Joined
·
40 Posts
Discussion Starter · #1 ·
I am new to the S40's and have been having a heck of a time finding a wheel selection for this 5x108 bolt pattern I want 17's or 18's but not wanting to spend the money for wheels like HRE, BBS, etc... I was on IPDUSA and theres like no wheels in the S40 section but I see wheels for like the S60 is this bolt patterns the same? Anyone know a good site with a good selection for parts?
 

·
Registered
Joined
·
4,024 Posts
Re: (Vash13)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>Vash13</b> »</i></TD></TR><TR><TD CLASS="quote">S60 wheels will work, but all it needs it Hub rings. The rings are cheap.</TD></TR></TABLE><p>Where can you buy the correct rings for our cars? <p>Thanks
 

·
Registered
Joined
·
4,563 Posts
Re: (jdsr917)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>jdsr917</b> »</i></TD></TR><TR><TD CLASS="quote"> <p>Where can you buy the correct rings for our cars? <p>Thanks</TD></TR></TABLE><p><A HREF="http://www.ipdusa.com/Volvo-S40-2005-2010/Wheels-&-Lugnuts/Hub-Centric-Adapter-Rings/p-135-560-5033" TARGET="_blank">http://www.ipdusa.com/Volvo-S4...-5033</A>/
 

·
Registered
Joined
·
4,563 Posts
Re: (mad matt)

19" will be a rough ride if you lower your car. 18" IMHO are the best. <p>I think these wheels would look sick on a S40!<br><IMG SRC="http://www.ipdusa.com/uploads/images_skus/13958.jpg" BORDER="0"><p><IMG SRC="http://www.ipdusa.com/uploads/images_skus/13957.jpg" BORDER="0"> <p><A HREF="http://www.ipdusa.com/Volvo-S60/Wheels-&-Lugnuts/IPD-VMS-Wheel/p-74-509-4837" TARGET="_blank">http://www.ipdusa.com/Volvo-S6...-4837</A>/
 

·
Registered
Joined
·
1,528 Posts
Re: (jdsr917)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>jdsr917</b> »</i></TD></TR><TR><TD CLASS="quote"> <p>Where can you buy the correct rings for our cars? <p>Thanks</TD></TR></TABLE><p>You can get them from IPD or any tire/wheel store I believe.
 

·
Registered
Joined
·
472 Posts
Yeah but that 38mm offset worries me...
 

·
Registered
Joined
·
9,114 Posts
Re: (heico2.4i)

Rockin a 38mm offset with my advans and have zero rubbing when turning, no worries <IMG NAME="icon" SRC="http://********************/smile/emthup.gif" BORDER="0"> <p>Might have to grab a set of those hub rings although my wheels are 65.2mm center bore im told and those are listed as 65.1 so should be close enough.
 

·
Registered
Joined
·
472 Posts
Re: (ForceFed Motorsports)

is your ride lowered kyle?
 

·
Registered
Joined
·
1,411 Posts
Re: (heico2.4i)

Im running 18x8 with a 40mm offset on 225/40r/18s with absolutely no rubbing even at full lock <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/tongue.gif" BORDER="0">
 

·
Registered
Joined
·
472 Posts
Re: (Kallvin22)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>Kallvin22</b> »</i></TD></TR><TR><TD CLASS="quote">Im running 18x8 with a 40mm offset on 225/40r/18s with absolutely no rubbing even at full lock <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/tongue.gif" BORDER="0"> </TD></TR></TABLE><p>even taking the sharp turns?
 

·
Registered
Joined
·
1,249 Posts
Re: (ForceFed Motorsports)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>ForceFed Motorsports</b> »</i></TD></TR><TR><TD CLASS="quote">Rockin a 38mm offset with my advans and have zero rubbing when turning, no worries <IMG NAME="icon" SRC="http://********************/smile/emthup.gif" BORDER="0"> <br></TD></TR></TABLE><p>What's the width on your Advans?
 

·
Registered
Joined
·
1,411 Posts
Re: (heico2.4i)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>heico2.4i</b> »</i></TD></TR><TR><TD CLASS="quote"><p>even taking the sharp turns?</TD></TR></TABLE><p>Yes hence the full lock <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/wink.gif" BORDER="0"> <p>Not lowered yet though
 

·
Registered
Joined
·
9,114 Posts
Re: (Moofluffen)

They are only 7.5" wide... with 225 tires though and yes the car is lowered on evolves hopefully on coilovers soon though. Will tuck front tire a bit and dont expect any issues.
 

·
Registered
Joined
·
233 Posts
Re: (mad matt)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>mad matt</b> »</i></TD></TR><TR><TD CLASS="quote">19" will be a rough ride if you lower your car. 18" IMHO are the best. <p>I think these wheels would look sick on a S40!<br><IMG SRC="http://www.ipdusa.com/uploads/images_skus/13958.jpg" BORDER="0"><p><IMG SRC="http://www.ipdusa.com/uploads/images_skus/13957.jpg" BORDER="0"> <p><A HREF="http://www.ipdusa.com/Volvo-S60/Wheels-&-Lugnuts/IPD-VMS-Wheel/p-74-509-4837" TARGET="_blank">http://www.ipdusa.com/Volvo-S6...-4837</A>/ </TD></TR></TABLE><p>DrooL !
 

·
Registered
Joined
·
4,024 Posts
Re: (40 Rouge)

I looked at the summer sale and for our cars there is really only 31 choice and i dont think many are for sale <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/frown.gif" BORDER="0"> <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/confused.gif" BORDER="0">
 

·
Registered
Joined
·
9,114 Posts
Re: (jdsr917)

Trick is to think outside the box... dont search thru wheel dealers since they are only going to list/stock popular bolt patterns, search individual wheel brands and their application guides. <p>You would be surprised how many companies have 5x108 available just have to ask a authorized dealer to order them for you <IMG NAME="icon" SRC="http://********************/smile/emthup.gif" BORDER="0">
 

·
Registered
Joined
·
1,528 Posts
totally agree with you Kyle however the price also increase quite a bit. The more popular/production of a wheel makes them a whole lot cheaper.
 
1 - 20 of 20 Posts
Top