SwedeSpeed - Volvo Performance Forum banner
1 - 13 of 13 Posts

·
Registered
Joined
·
542 Posts
Discussion Starter · #1 ·
I figured this would get lost in the classified section so I am offering this up for someone if they want it for the S40. The shift knob is a Momo Raptor burlwood.


If you want it let me know and I'll send it out to you as I am cleaning out my various parts that I don't have a use for anymore.
Todd
 

·
Registered
Joined
·
542 Posts
Discussion Starter · #4 ·
Re: (cmurphy2266)

Ha Ha, i guess if you are having synco issues it could come in handy. I had this in my S4 and it matched the burlwood perfectly. The weight of this thing gives a very smooth shift feel compared to the stock knob which felt very notchy. Like I said its a freebie.
http://********************/smile/emthup.gif
 

·
Registered
Joined
·
4,563 Posts
Re: (Bigblk4)

Quote, originally posted by Bigblk4 »
Ha Ha, i guess if you are having synco issues it could come in handy. I had this in my S4 and it matched the burlwood perfectly. The weight of this thing gives a very smooth shift feel compared to the stock knob which felt very notchy. Like I said its a freebie.
http://********************/smile/emthup.gif

Freebi like it's free?? Hell, I'll makeit work on my R!
 

·
Registered
Joined
·
4,563 Posts
Re: (Bigblk4)

Wow! Thank you. http://********************/smile/emthup.gif http://********************/smile/emthup.gif I'm on my mobile right now and it won't let me send PM's I'll shoot you a PM when I get to a computer.

If for some reason I can't make it fit, I'll post it back up for free!
 

·
Registered
Joined
·
6,887 Posts
Any thing else that would be cool for an S40 project?
 

·
Registered
Joined
·
542 Posts
Discussion Starter · #9 · (Edited)
Re: (mad matt)

Sounds good, it uses 3 allen head set screws 120 degrees apart from each other to lock itself down on the stick, the collar that says momo then threads onto the base to cover the set screws. so unless the shaft to the linkage is bigger than the opening at the bottom of the Momo it will work. If you run into any issues let me know.

Ill be cleaning out the parts in storage soon so keep your eyes open for anything you may want.

http://********************/smile/emcocktl.gif

Todd
 

·
Registered
Joined
·
542 Posts
Discussion Starter · #10 ·
Re: (carreragt7)

Quote, originally posted by carreragt7 »
Any thing else that would be cool for an S40 project?

I know I got some Hella Optilux 1182 projection fogs sitting around. Maybe for a stealth grill install? ill go through and figure what I got that may be of use to you guys.
 

·
Registered
Joined
·
2,752 Posts
Re: (mad matt)

Quote, originally posted by mad matt »
Wow! Thank you. http://********************/smile/emthup.gif http://********************/smile/emthup.gif I'm on my mobile right now and it won't let me send PM's I'll shoot you a PM when I get to a computer.

If for some reason I can't make it fit, I'll post it back up for free!

I call dibs on it if you cant (please dont)

seriously though, if you cant id like to be first in line...
and guess what! If I cant make it fit (i have gt) ill post it up...for free!
 

·
Registered
Joined
·
542 Posts
Discussion Starter · #13 ·
Re: (jsalbre)

Quote, originally posted by jsalbre »
If you don't mind I'd be happy to take those lights off your hands...

All parts have been spoken for, if I have anything else that may be of use to you guys I will put it up.
Todd
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top