SwedeSpeed - Volvo Performance Forum banner

1 - 17 of 17 Posts

·
Registered
Joined
·
1,433 Posts
Discussion Starter · #1 ·
Springs and Engine mounts, a couple available [i bought both]<p><br>Springs & mounts:<br><A HREF="http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=016&item=260013504446&rd=1&sspagename=STRK%3AMEWN%3AIT&rd=1" TARGET="_blank">http://cgi.ebay.com/ebaymotors...&rd=1</A><p><A HREF="http://cgi.ebay.com/EVOLVE-UPPER-ENVINE-MOUNT-VOLVO-S60-V70_W0QQitemZ250012460867QQihZ015QQcategoryZ50454QQcmdZViewItem" TARGET="_blank">http://cgi.ebay.com/EVOLVE-UPP...wItem</A><p>Spacers<br><A HREF="http://cgi.ebay.com/ebaymotors/VOLVO-S60-R-V-70-WHEEL-SPACERS-5MM_W0QQcmdZViewItemQQcategoryZ42614QQihZ016QQitemZ260013504352" TARGET="_blank">http://cgi.ebay.com/ebaymotors...04352</A><p>Hoses:<br><A HREF="http://cgi.ebay.com/ebaymotors/EVOLVE-VOLVO-S60R-SILICONE-RADIATOR-HOSE-KIT_W0QQcmdZViewItemQQcategoryZ33601QQihZ016QQitemZ260015675391" TARGET="_blank">http://cgi.ebay.com/ebaymotors...75391</A><p><br>the springs are nice because you can make an offer on them. I ended up making an offer and got mine for about 225 shipped. I'll let everyone know how it goes when they get here <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/smile.gif" BORDER="0">
 

·
Registered
Joined
·
1,433 Posts
Discussion Starter · #3 ·
Re: (R_Rated)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>R_Rated</b> »</i></TD></TR><TR><TD CLASS="quote">i think they are from alamo</TD></TR></TABLE>ah, that would explain some of the svenske items.<p>well, i found it to be a good deal for me, saved a buck or two on some minor mods that are quite expensive otherwise. <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/smile.gif" BORDER="0">
 

·
Registered
Joined
·
764 Posts
I sent these guys a message through Ebay asking "Do you have any of the Evolve or SvR exhaust's in stock??".......Here is the response I got...."HAVE THE ALAMO EXHASUSTS AND DOWNPIPES IN STOCK <br>CALLUS FOR DETAILS 817 860 4300"......So I am guessing that they are referring to the SvR exhaust's and DP's??
 

·
Registered
Joined
·
1,052 Posts
Re: (s60rdood)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>s60rdood</b> »</i></TD></TR><TR><TD CLASS="quote">I sent these guys a message through Ebay asking "Do you have any of the Evolve or SvR exhaust's in stock??".......Here is the response I got...."HAVE THE ALAMO EXHASUSTS AND DOWNPIPES IN STOCK <br>CALLUS FOR DETAILS 817 860 4300"......So I am guessing that they are referring to the SvR exhaust's and DP's??</TD></TR></TABLE><p>Most likely. The have a lot of Richard's stuff that they still are trying to move. God only knows how many things were on backorder for the longest time and came in after the business went south. I think the Evolve items were random left overs from some of the projects.
 

·
Registered
Joined
·
398 Posts
Re: (s60rdood)

How do these comp to the TME exhausts & DP's?
 

·
Registered
Joined
·
764 Posts
Re: (s40R)

Just got off the phone with them and they have the SvR 2 Resonator Systems, black ceramic coated, and are going for $850 and shipping is about $90-95.
 

·
Registered
Joined
·
764 Posts
Re: (s40R)

s40- They are a full 3" system with V-Band clamps instead of slip-joints, are going to be ALOT louder than the TME exhaust, and from what I have read the craftsmanship rocks on them.
 

·
Registered
Joined
·
398 Posts
Re: (s60rdood)

S60rdood,<p>The Svenske is louder and sportier and costs about the same as the TME?<br>No Warranty since they are out of business, I'm just weighing my options to build up my R.<p>Regards<p><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>s60rdood</b> »</i></TD></TR><TR><TD CLASS="quote">s40- They are a full 3" system with V-Band clamps instead of slip-joints, are going to be ALOT louder than the TME exhaust, and from what I have read the craftsmanship rocks on them.</TD></TR></TABLE>
 

·
Registered
Joined
·
764 Posts
Re: (s40R)

Yes, it is about $850 and another $90 or so shipping, and will be ALOT louder than the TME. <p>As for the warranty I am not sure, the pipe IS ceramic coated AND stainless steel underneath the coating, so it rusting out or anything like that is taken care of, and as for the welds for the hanger's, they should be nice and clean...like I said, from what I have read here on the forum, if you can get your hands on one, this is the exhaust to have (if you don't mind the sound level of it, but others have added a certain model Magnaflow muffler to the rear-section and got rid of droning and lowered the noise level down to everyday driving levels) Not too much else it would need a warranty for. <p>They have the SvR DP's as well <IMG NAME="icon" SRC="http://********************/smile/emthup.gif" BORDER="0"> for $969..not sure on shipping for those. <p>I'm waiting to hear back from them, as they are getting back to me fairly quick with previous questions, so I might have more info by the end of today.
 

·
Registered
Joined
·
906 Posts
Re: (s60rdood)

keep us posted, I'm definitely interested as well <IMG NAME="icon" SRC="http://********************/smile/emthup.gif" BORDER="0">
 

·
Registered
Joined
·
13,453 Posts
Re: (jdog)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD><i>Quote, originally posted by <b>jdog</b> »</i></TD></TR><TR><TD CLASS="quote">Where's "R"kelly on this? Doesn't he have this exhaust?</TD></TR></TABLE><p>He did, but then he swapped it out for a Ferrita, I think. Some hard running caused the Svenske tips to change color, IIRC.
 

·
Registered
Joined
·
764 Posts
Re: (Wayne T5)

Yea, the tip did "bronze" itself, but some of the people running the SvR also use a Magnaflow Tip that is Double-Walled, and haven't had a "color-shift" problem since.
 

·
Registered
Joined
·
1,433 Posts
Discussion Starter · #15 ·
what's the diameter on the DP? 3"? i may be interested in ordering the DP and Exhaust to replace my custom exhaust...for uniformity's sake.<p>does anyone have clips of the SvR 2-resonator exhaust?
 

·
Registered
Joined
·
764 Posts
Re: (Cicada)

Yes, the DP AND Exhaust are both 3"......Clips can be found here: <p><A HREF="http://forums.swedespeed.com/zerothread?id=46924" TARGET="_blank">http://forums.swedespeed.com/zerothread?id=46924</A> ....(right click and save as the first clip, that's the 2-res version)......"R"Kelly and others that have exhaust's on thier R's put the tread together and I have found it VERY helpful in making the right choice for an Exhaust.
 

·
Registered
Joined
·
1,433 Posts
Discussion Starter · #17 ·
Re: (s60rdood)

wow. it actually sounds really good; a lot like the custom job i had done, though, i kind of like mine -- but if i get the DP, i'll need to get it redone in 3" because right now mine's actually 2.5" all the way back :/
 
1 - 17 of 17 Posts
Top