[1999myc70]

Looks like I will need to contact Xemodex to get my ETM repaired, I got the ETS light with the check engine light. I know what I will be doing this weekend! The code was P0121 throttle position sensor..

 

[precopster]

Perfect candidate for a contactless conversion. If there are no ETM board related error messages you can save $$$ and DIY for about $135. I did 3 years ago.

 

[1999myc70]

I have everything out of the way but there is a small problem..the ETM plug is routed behind the starter, do I have to remove the starter or is there another way other than cutting the plug off. :facepalm:

 

[precopster]

No just remove the netal bracket at the left of the starter. One 12mm bolt and 2 x 10mm nuts and the cable will slip past the starter.

Too many people cut them only to discover the rebuilders will not accept them that way.

 

[1999myc70]

Ok, I will try that, I know cutting wires is a very last resort. Out to work on her again!

 

[1999myc70]

Thanks Precopster, That worked and now it is out and packaged up to send off to Xemodex, It is a white tag, I think that means that it has never been removed and I doubt if it ever had he recall done. I will post more later.

 

[1999myc70]

ETM is on its way to Xemodex for repair!

 

[1999myc70]

ETM changed and she is running great!! Thanks Xemodex!! glad to have her going again!!artywave: