EFI B20 parts. Engine was supposedly from a 1973 145. It had an auto trans and a/c. I decided not to fuel inject my 122s, and no longer need these parts. Prices negotiable, and package deals encouraged. Local pickup or shipping from Gainesville, FL 32607.
New parts
Rod bearings (NOS) 0.20 - $20
Piston rings, standard - $20 Photos: https://photos.app.goo.gl/51Wg5Lrwicvv2m4D6
Aluminum timing gear set. SOLD Photos: https://photos.app.goo.gl/3JdLz7GNfXVJHSFF6
Reconditioned parts
Cylinder head. Hot tanked, magna fluxed, rebuilt by machine shop. New valves, valve stem seals from VP Autoparts, new seats. SOLD. Photos: https://photos.app.goo.gl/dgMYGv8tLDMNTmVo9
Crankshaft, reground, rods 0.20, mains 0.10 $150
EFI Intake manifold. Cleaned, no cracks, inspected by machine shop. SOLD. Photos: https://photos.app.goo.gl/LwZBCxYnQK6HbJqNA
EFI Exhaust manifold. Cleaned, no cracks, inspected by machine shop. SOLD. Photos: https://photos.app.goo.gl/cMVgR9JRWKKsZTx27
4x Fuel injectors, professionally cleaned and flow tested. SOLD. Photos: https://photos.app.goo.gl/dGU6YcS5dbc1F8kh9
B20 EFI block, standard bore. Hot tanked, magna fluxed, cylinders honed, and new cam bearings installed by machine shop. $150
Bosch 55a alternator. Reman from NAPA. SOLD
Used parts
Pistons+rods. Inspected and cleaned by machine shop, was told they are good to use. $40
B20 York A/C compressor bracket $50 SOLD
A/C Idler pulley $30 SOLD
EFI intake manifold support $20
Rocker shaft assembly $20
Oil pan $30
Distributor $40
Flex Plate, 6 bolt $30
Flywheel, 8 bolt, 1975 $40
Misc fasteners and sensors, condition unknown
Core parts - free to pick up
Camshaft, worn, pitted
Oil pump
York A/C compressor
Have receipts for most everything, and pictures available.
New parts
Rod bearings (NOS) 0.20 - $20
Piston rings, standard - $20 Photos: https://photos.app.goo.gl/51Wg5Lrwicvv2m4D6
Aluminum timing gear set. SOLD Photos: https://photos.app.goo.gl/3JdLz7GNfXVJHSFF6
Reconditioned parts
Cylinder head. Hot tanked, magna fluxed, rebuilt by machine shop. New valves, valve stem seals from VP Autoparts, new seats. SOLD. Photos: https://photos.app.goo.gl/dgMYGv8tLDMNTmVo9
Crankshaft, reground, rods 0.20, mains 0.10 $150
EFI Intake manifold. Cleaned, no cracks, inspected by machine shop. SOLD. Photos: https://photos.app.goo.gl/LwZBCxYnQK6HbJqNA
EFI Exhaust manifold. Cleaned, no cracks, inspected by machine shop. SOLD. Photos: https://photos.app.goo.gl/cMVgR9JRWKKsZTx27
4x Fuel injectors, professionally cleaned and flow tested. SOLD. Photos: https://photos.app.goo.gl/dGU6YcS5dbc1F8kh9
B20 EFI block, standard bore. Hot tanked, magna fluxed, cylinders honed, and new cam bearings installed by machine shop. $150
Bosch 55a alternator. Reman from NAPA. SOLD
Used parts
Pistons+rods. Inspected and cleaned by machine shop, was told they are good to use. $40
B20 York A/C compressor bracket $50 SOLD
A/C Idler pulley $30 SOLD
EFI intake manifold support $20
Rocker shaft assembly $20
Oil pan $30
Distributor $40
Flex Plate, 6 bolt $30
Flywheel, 8 bolt, 1975 $40
Misc fasteners and sensors, condition unknown
Core parts - free to pick up
Camshaft, worn, pitted
Oil pump
York A/C compressor
Have receipts for most everything, and pictures available.