SwedeSpeed - Volvo Performance Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
547 Posts
Discussion Starter · #1 ·
Yet another milestone has passed in my now 18 week saga. The exhaust is now done and the car goes back to European Motors for final wiring and drive test. The exhaust starts with a 3" OBX angle flange DP to a 3" Quick Time electric cutout MagnaFlow monolith ceramic cat topped off with a magnaflow pipe 3" inlet 4" double wall outlet. I went with aluminized pipe becuase this car will barely see rain let alone snow. Total cost including the electric cutout was $775 installed. Thanks to Tracy Keckler of Keckler Oil in Weeping Water for his wicked welding skills and patience for my ideas. Thanks also to my wife who ran out of the house with two kids in tow to snap this pictures while it was on the lift. (Thanks honey) <IMG NAME="icon" SRC="http://www.vwvortex.com/vwbb/biggrin.gif" BORDER="0"> <br><IMG SRC="http://i292.photobucket.com/albums/mm37/heavyiron1978/August09160.jpg" BORDER="0"><br><IMG SRC="http://i292.photobucket.com/albums/mm37/heavyiron1978/August09161.jpg" BORDER="0"><br><IMG SRC="http://i292.photobucket.com/albums/mm37/heavyiron1978/August09162.jpg" BORDER="0"><br><IMG SRC="http://i292.photobucket.com/albums/mm37/heavyiron1978/August09164.jpg" BORDER="0"><br><IMG SRC="http://i292.photobucket.com/albums/mm37/heavyiron1978/August09165.jpg" BORDER="0"><br><IMG SRC="http://i292.photobucket.com/albums/mm37/heavyiron1978/August09166.jpg" BORDER="0"><br><IMG SRC="http://i292.photobucket.com/albums/mm37/heavyiron1978/August09168.jpg" BORDER="0">
 
1 - 4 of 4 Posts
Top