SwedeSpeed - Volvo Performance Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
344 Posts
Discussion Starter · #1 ·
a few months ago i built a precision front mount intercooler for my S70. It was on my car for about 4 months until i decided to change my plans with the S70. i am now returning it to stock and focusing on my wrx, so this is your chance to take advantage of a very rare find. the kit comes with the following:<p>-2.25" piping<br>-silicone couplers<br>-T bolt clamps (and a couple worm clamps)<br>-IAC coupler<br>-Precision intercooler (amazing condition)<br>-Forge BOV<p>because of the cold side piping, you will most likely need to purchase a smaller sized battery or relocate your battery. if you would like pictures of what i did, i can send them to you<p>Everything has been cut to the proper size and i have never had a single negative issue, the positive effects however, were remarkable and easily appreciated. i am looking for <B>$400 plus shipping OBO (emphasis on the or best offer portion)</B><br><A HREF="http://s400.photobucket.com/albums/pp84/iroc810/?action=view&current=IMGP3322.jpg" TARGET="_blank"><IMG SRC="http://i400.photobucket.com/albums/pp84/iroc810/IMGP3322.jpg" BORDER="0"></A><br><IMG SRC="http://i400.photobucket.com/albums/pp84/iroc810/IMGP3323.jpg" BORDER="0"><br><IMG SRC="http://i400.photobucket.com/albums/pp84/iroc810/IMGP3324.jpg" BORDER="0"><p><br>
 

·
Registered
Joined
·
344 Posts
Discussion Starter · #3 ·
<IMG SRC="http://i400.photobucket.com/albums/pp84/iroc810/IMGP2413.jpg" BORDER="0"><br><IMG SRC="http://i400.photobucket.com/albums/pp84/iroc810/hotside.jpg" BORDER="0"><br>
 
1 - 5 of 5 Posts
Top