SwedeSpeed - Volvo Performance Forum banner
1 - 13 of 13 Posts

·
Registered
Joined
·
65 Posts
Discussion Starter · #1 ·
I hate to do it, since it has been so fun, but a growing family forces the 850R to go bye bye so I am selling all the BSR performance stuff I put on the car.<BR>3" stainless down pipe with cat<BR>Volvo o2 sensor extension harness for downpipe<BR>2.5 " high flow exhaust<BR>Opti-flow semi-cold air kit with filter<BR>Stage 3 chip I will provide socket or consider exchange ecu<BR>Rising rate fuel pressure regulator (keeps A/F mixture at aobut 11:1 at 18 psi boost)<BR>Volvo/Ohlins upper strut tie bar<BR>A-pillar cover with VDO boost gauge<BR>15 k miles/ 6 months of use <BR>$1300 was $1800 new<BR>4 MIM Venezia 17/7.5 wheels with Kuhmo Ecsta 712's 215/40/17's<BR>$600<BR>Email me for more info. Pics are at <A HREF="http://stephenson.freehosting.net/photo.html" TARGET=_blank>http://stephenson.freehosting.net/photo.html</A> <BR>Rich S.<P><p>[This message has been edited by Thor's Hammer (edited 03-17-2002).]
 

·
Registered
Joined
·
65 Posts
Discussion Starter · #3 ·
George, I am looking at the chrysler 300M, its no Volvo but a nice car. Lots of front and rear leg room. I have put my plans to bring the BSR stuff on hold, though I may hook a friend of mine up who owns a tuning co. here in phoenix with them if he is interested.<BR>BSR said they can provide you with the German test of thier S60 when it is printed, but I don't know if it will be in english. I will ask if they can provide the general specs to you in English for now if you still want to do the article.<P>Rich S.
 

·
Premium Member
Joined
·
6,997 Posts
I'd be open to whatever. I can probably find someone to translate.<P>300M isn't a bad car, but it's too bad the BSR plans are changing. Hopefully it'll work out with your friend.<P>Good luck selling your stuff.
 

·
Registered
Joined
·
8 Posts
I'm interested in the Downpipe and Cat. Are you going to "piece-out" the performance parts? Please let me know, I REALLY AM interested.<P>
 

·
Registered
Joined
·
289 Posts
I don't think he is interested in piece-out. I asked and never got a answer <IMG SRC="http://www.swedespeed.com/ubb/frown.gif"> <BR> <A HREF="http://www.swedespeed.com/ubb/Forum13/HTML/000472.html" TARGET=_blank>http://www.swedespeed.com/ubb/Forum13/HTML/000472.html</A> <P><BR>
 

·
Registered
Joined
·
65 Posts
Discussion Starter · #8 ·
Sorry for the slow posts guys, I've been traveling for work and away from a computer. <BR>I would sell the whole car for $22500 with all the parts on it, 58K miles with warranty for another 4yrs to 99,600 miles.<BR>I would like to sell the parts as a kit but if I have too I will break up the parts.<BR>In my ad I made a mistake, I would like 1300 for the BSR goodies and VDO guage, and 100 for the tie bar and 600 for the wheels.<BR>Man I just got home from the airport and am going to miss merging onto the highway at 110+. <IMG SRC="http://www.swedespeed.com/ubb/frown.gif"><P>Rich S<p>[This message has been edited by Thor's Hammer (edited 03-18-2002).]
 

·
Registered
Joined
·
50 Posts
Hi kind of new to this i just bought a 850GLT wagon, 5-spd. I would like to do some minor stuff i noticed you still have your open air filter, would it work w/ my non-turbo?<BR>thanks
 

·
Registered
Joined
·
65 Posts
Discussion Starter · #11 ·
I don't think it will fit. The semi cold airbox has its opening in the left rear corner for the mass airflow sensor, and I think on the naturally aspirated engines like yours the mass sensor mounts on the other side. <P>Rich S.
 
1 - 13 of 13 Posts
Top