Blitz DC boost gauge installion Q

1891 Views 6 Replies 4 Participants Last post by xenophobic, May 17, 2006

KVB-R

Discussion Starter · May 16, 2006

I know there have been a few Blitz gauge installations lately, and I have one myself just not yet installed.

I was wondering if anyone who has installed has any information on how to wire it. The manual is in Japanese.......I do have a translator on the hook, but as a last resort.....

I merely just want the wiring breakdown and any help would be muych appreciated!!!!

Thanks,
Kevin

Save

1 - 2 of 7 Posts

xenophobic

· #3 · May 17, 2006

Re: Blitz DC boost gauge installion Q (Helmut Ranff)

Which gauges will you install?

If only boost you will use the electric socket and the pipe.Nothing else.

You will connect the T pipe on the green point at this picture.(I first connected to wrong place but this picture is the place where you have to connect)
Lenghten the pipe to the Live Unit of Blitz.
Next to the steering wheel,find an empty fuse which activated by the key.
Create a good design for your gauge.

And it is finished.

See less See more

Save

xenophobic

· #7 · May 17, 2006

Yes but if you don't understand from electrical connections,ask for help of someone other.Will be better I think.

I am also learning new but the points I know are such as this:
1-You can save data up to 99 seconds
2-You can see the peak numbers by pushing the right button
3-The neddle moves instantly or delayed by pressing the center button
4-Looks cool in your car

Save

1 - 2 of 7 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month