SwedeSpeed - Volvo Performance Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
160 Posts
Discussion Starter · #1 ·
Unless im missing something or there is a trick I dont know about, it sure looks like I have to drop the rear subframe to replace these. the forward inner bolt must have a nut on the other side (between gas tank and subframe) because the bolt just spins. There doesnt appear to be any way to access that bolt if its there, uhg didnt want to do that
 

·
Registered
Joined
·
160 Posts
Discussion Starter · #2 ·
well i figured it out. had to remove bolts for subframe on one side of car at a time to lower it. then wedged a socket and several extension up over the gas tank (after memoving straps) to get to the nut on the backside of frame. Pass side will probably require removing the filler neck but im doing that tomorrow

 
1 - 2 of 2 Posts
Top