Re: 3" High-Flow (TRUE straight-thru design) Exhaust (phuz)
Look at that sexy clamping device...
Look at that sexy clamping device...
3" High-Flow (TRUE straight-thru design) Exhaust
Prototype is complete and thanks to these "Ultra-Quiet" Straight-Thru designs, it will create a lot of top end power and it still sounds AMAZING...not obnoxious.
Audio clips coming later tonight...
![]()
![]()
![]()
Audio clips coming later tonight...
3
1 - 20 of 106 Posts
Re: 3" High-Flow (850arrrsaylikepirate)
Ground clearance gonna be an issue? I've got 3" all the way back and it scrapes ALL THE TIME!
![]()
Ground clearance gonna be an issue? I've got 3" all the way back and it scrapes ALL THE TIME!
Re: 3" High-Flow (Capital R)
Shouldn't be. I mean, the pipe will stick 1" lower than the factory set, but I tried to make it as ground clearance friendly as possible because I don't want issues. I just took it out for a "healthy" run. Idle sound doesn't change, which is great. It has a much deeper note to it and when you run the RPMs up, it just sounds like ecstasy. You can definitely feel the extra ponies in the higher RPM too.
I am going to try to gather some sound clips now.
| Quote, originally posted by Capital R » |
| Ground clearance gonna be an issue? I've got 3" all the way back and it scrapes ALL THE TIME!
|
Shouldn't be. I mean, the pipe will stick 1" lower than the factory set, but I tried to make it as ground clearance friendly as possible because I don't want issues. I just took it out for a "healthy" run. Idle sound doesn't change, which is great. It has a much deeper note to it and when you run the RPMs up, it just sounds like ecstasy. You can definitely feel the extra ponies in the higher RPM too.
I am going to try to gather some sound clips now.
Re: (phuz)
Sounds like you need to take a trip up to Pine Grove for some help
![]()
| Quote, originally posted by phuz » |
| Replied! I tried to get some sound clips on my little Sony digital recorder and it sounds like crap, so I'm guessing I need my video camera to do it. |
Sounds like you need to take a trip up to Pine Grove for some help
Re: (chinaonnitrous1)
Again I am pretty drunk but the Phuz puts the V band clamp on the exhaust. This is very similar to me demanding only wiggins on all IC piping.
Using a V band my friends is badass http://********************/smile/emthup.gif
Again I am pretty drunk but the Phuz puts the V band clamp on the exhaust. This is very similar to me demanding only wiggins on all IC piping.
Using a V band my friends is badass http://********************/smile/emthup.gif
Re: (Helmut Ranff)
It is actually not a V-band but works the same way. Our company uses these in process piping, so I am able to order them at cost, which will definitely help in pricing.
![]()
| Quote, originally posted by chinaonnitrous1 » |
| Looks great! Less bends, V-band clamp. Fantastic. |
| Quote, originally posted by Helmut Ranff » |
| Again I am pretty drunk but the Phuz puts the V band clamp on the exhaust. This is very similar to me demanding only wiggins on all IC piping. Using a V band my friends is badass http://********************/smile/emthup.gif |
It is actually not a V-band but works the same way. Our company uses these in process piping, so I am able to order them at cost, which will definitely help in pricing.
2
Re: 3" High-Flow (Mika)
Phuz, like all your other products, this looks to be fantastic! http://********************/smile/emthup.gif
Can't wait to hear the soundclip!! (both exhaust sans DP, and full 3" turbo back)
Phuz, like all your other products, this looks to be fantastic! http://********************/smile/emthup.gif
Can't wait to hear the soundclip!! (both exhaust sans DP, and full 3" turbo back)
Re: (legbend)
I'm speaking with fabricator today to talk about scheduling. I should have them available by May.
I will take one tonight when I get home!
I know, I'm a real bastard
![]()
I am not sure what exact frequencies are being produced, but it is a very deep tone. It sounds deeper at idle, but with a DB level of a stock system. Normal cruising is also fairly quiet with absolutely ZERO droning effects. The best way to describe it is the same sound effects you would get with a wide-open external wastegate. It is quiet until you get on it, at which point it sounds very aggressive. It is taking me awhile to get a decent sound clip because they can be very misleading.
Thanks for the suggestion. That is a good idea.
| Quote, originally posted by SlowR » |
| Love the black! When do you think you'll be cranking these out? Hopefully by early may, It'll make my IC/DP/cat back shopping a lot easier! |
I'm speaking with fabricator today to talk about scheduling. I should have them available by May.
| Quote, originally posted by BeerEngineer » |
| has pictures on R? possibly upskirt shot? |
I will take one tonight when I get home!
| Quote, originally posted by YK-GTR » |
| Pending sound clips and installed pics... This is basically already on my wish list, with the PhuzDP and Phmic.. Dammit phuz! |
I know, I'm a real bastard
| Quote, originally posted by Mika » |
| Just out of curiosity: The front resonator is right behind the cat, like in S60. What frequencies are you hitting with that location? |
I am not sure what exact frequencies are being produced, but it is a very deep tone. It sounds deeper at idle, but with a DB level of a stock system. Normal cruising is also fairly quiet with absolutely ZERO droning effects. The best way to describe it is the same sound effects you would get with a wide-open external wastegate. It is quiet until you get on it, at which point it sounds very aggressive. It is taking me awhile to get a decent sound clip because they can be very misleading.
| Quote, originally posted by legbend » |
| should offer a factory-style dual tip. in black also. |
Thanks for the suggestion. That is a good idea.
Re: (phuz)
I'll tell ya what Phuz, this makes me wish I didn't hit a tree. That is one fiiiiine looking exhaust setup. http://********************/smile/emcocktl.gif
I'll tell ya what Phuz, this makes me wish I didn't hit a tree. That is one fiiiiine looking exhaust setup. http://********************/smile/emcocktl.gif
1 - 20 of 106 Posts
